ZL26E成型机滤棒颗粒均匀施加装置的设计  

Design of Particle Uniformity Application Device for ZL26E Filter Rod Maker

作　　者：孙长义 赵斌 周有华 范美顺 冯正江 SUN Changyi;ZHAO Bin;ZHOU Youhua;FAN Meishun;FENG Zhengjiang(Qujing Cigarette Factory,Hongyun Honghe Tobacco(Group)Co.,Ltd.,Qujing 655001,China)

机构地区：[1]红云红河烟草(集团)有限责任公司曲靖卷烟厂,云南曲靖655001

出　　处：《河南科技》2024年第17期29-32,共4页Henan Science and Technology

摘　　要：【目的】为解决ZL26E成型机生产颗粒料棒时,颗粒施加不均匀导致滤棒的重量和吸阻波动大的问题,设计了一种颗粒均匀施加装置。【方法】该装置由颗粒滑落装置和丝束稳定装置组成。颗粒通过滑落装置均匀、平稳落到丝束带上,丝束稳定装置通过负压吸风减少丝束带在运行过程中的抖动,同时将颗粒吸附在丝束带上送入成型工序。【结果】通过综合测试台,检测ZL26E成型机生产出的滤棒的重量标准偏差数据和吸阻标准偏差数据。检测结果表明,滤棒重量标准偏差由0.013 2 g减少到0.008 4 g;吸阻标准偏差由147.071 Pa减小到109.682 Pa。【结结论论】该装置运用后,有效提高了颗粒施加的均匀性,确保料棒的重量标准和吸阻标准都能够得到有效控制。[Purposes]To address the issue of draw resistance and weight fluctuation resulting from the uneven application of particles during the production of particle filter rod by the ZL26E filter rod maker,a device for uniform particle application is designed.[Methods]The device consists of a particle sliding unit and a tow stabilization unit.Through the sliding unit,particles cascade evenly and smoothly onto the tow belt,while the tow stabilization unit mitigates the jitter of the tow belt during operation via negative pressure suction.Simultaneously,the particles are adsorbed onto the tow belt and conveyed to the form-ing process.[Findings]The weight standard deviation data and draw resistance standard deviation data of the particle filter rod produced by the ZL26E filter rod maker were evaluated using a comprehensive test bench.The standard deviation of weight decreased from 0.0132 g to 0.0084 g,and the standard de-viation of the draw resistance reduced from 147.071 Pa to 109.682 Pa.[Conclusions]After the imple-mentation of the device,the uniformity of particle application was significantly enhanced,ensuring effec-tive control over the quality of the rods and the suction resistance index.

关 键 词：ZL26E成型机 复合滤棒 均匀性 颗粒 丝束 

分 类 号：TS43[农业科学—烟草工业]