抽采钻孔封孔深度试验技术在煤矿中的应用  

Application of Sealing Depth Test Technology of Extraction Borehole in Coal Mine

作　　者：周海 ZHOU Hai(Guizhou Faer Coal Industry Co.,Ltd.,Liupanshui 553017,China)

机构地区：[1]贵州发耳煤业有限公司,六盘水553017

出　　处：《价值工程》2024年第28期103-105,共3页Value Engineering

摘　　要：通过COMSOL数值分析和钻屑法对距巷帮不同深度的应力分布进行分析,根据封孔深度的范围应该超出巷道两帮的卸压带或塑性区范围,但要小于巷帮集中应力峰值点的深度,最佳封孔深度为6.5~11m,在煤矿1807工作面运输顺槽抽放巷选择3组钻场分别进行不同封孔深度的对比试验,封孔深度取11m,验证了合理封孔深度的准确性。The stress distribution is analyzed at different depths from roadway sides by COMSOL numerical analysis and cuttings method.The range of sealing depth should be beyond the unloading zone or plastic zone on roadway sides,but less than the depth of the peaks of stress concentration of roadway sides.The best sealing depth is 6.5~11m.Three groups of drilling sites were selected in 1807 suitable drainage roadway to carry out comparative tests of different hole sealing depths.The sealing depth is 11m,which verifies the accuracy of reasonable sealing depth.

关 键 词：瓦斯抽采 钻屑法 数值模拟 封孔深度 瓦斯浓度 

分 类 号：TD712[矿业工程—矿井通风与安全]