检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:靳京爵 李涛[3,4] 郭东旭[3,4] Jin Jingjue;Li Tao;Guo Dongxu(Key Laboratory of Intelligent Prevention and Control and Emergency for Coal Mine Disasters inXinjiang,Xinjiang Institute of Engineering,Xinjiang Urumqi 830023;School of Safety Science and Engineering,Xinjiang Institute of Engineering,Xinjiang Urumqi 830023;Xinjiang Research Institute,Liaoning Technical University,Xinjiang Urumqi 830023;College of Mining,Liaoning Technical University,Liaoning Fuxin 123000)
机构地区:[1]新疆工程学院新疆煤矿灾害智能防控与应急重点实验室,新疆乌鲁木齐830023 [2]新疆工程学院安全科学与工程学院,新疆乌鲁木齐830023 [3]辽宁工程技术大学新疆研究院,新疆乌鲁木齐830023 [4]辽宁工程技术大学矿业学院,辽宁阜新123000
出 处:《山东煤炭科技》2024年第9期6-11,共6页Shandong Coal Science and Technology
摘 要:胜利煤矿一采区规划开采的煤层为14煤层和近距离下伏的15煤层,为确保在采15煤层的开采安全,提出在开采14煤层时工作面顶板铺设金属网形成人工假顶,对14煤开采后的人工假顶进行可靠性分析,采用简支梁稳定分析法,确定人工假顶极限状态的厚度为5.74 m。根据水化学实验可得,采空区积水对铺设金属网有腐蚀性,分析采空区铺设的金属网有效赋存时间不超过3 a。结合再生顶板形成时间分析确定,当15煤层与14煤层存在1 m以上的层间距时,15煤至少需要在14煤层开采完毕3.5 a后进行采掘活动;当15煤层与14煤层合层时,15煤至少需要在14煤层开采完毕5 a后进行采掘活动。The planned mining coal seams for the first mining area of Shengli Coal Mine are the 14th coal seam and the nearby underlying 15th coal seam.To ensure the safety of mining the 15th coal seam,it is proposed to lay a metal mesh on the roof of the working face to form an artificial false roof during the mining of the 14th coal seam.The reliability analysis of artificial false roof after the 14th coal mining is carried out,and the simply supported beam stability analysis method is used to determine the thickness of the artificial false roof limit state to be 5.74 m.According to hydrochemical experiments,it is concluded that the accumulated water in goaf is corrosive to the laying of metal mesh.It is analyzed that the effective occurrence time of the metal mesh laid in the goaf will not exceed 3 years.Combined with the analysis of the formation time of the regenerated roof,it is determined that when there is a layer spacing of more than 1 m between the 15th coal seam and the 14th coal seam,mining activities for the 15th coal need to be carried out at least 3.5 years after the completion of mining for the 14th coal seam;When the 15th coal seam merges with the 14th coal seam,mining activities for the 15th coal need to be carried out at least 5 years after the completion of mining for the 14th coal seam.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33