Influence of Formulation and Hot-Pressing Conditions on the Performance of Bio-Based Molasses Adhesive for Plywood  

作　　者：Jajang Sutiawan Alifah Syahfitri Sukma Surya Kusumah Dede Hermawan Rita Kartika Sari Luthfi Hakim Efri Mardawati Muhammad Adly Rahandi Lubis 

机构地区：[1]Research Center for Biomass and Bioproducts,National Research and Innovation Agency,Cibinong,16911,Indonesia [2]Forest Product Department,Faculty of Forestry and Environment,IPB University,Bogor,16680,Indonesia [3]Department of Forest Products,Faculty of Forestry,Universitas Sumatera Utara,Medan,20155,Indonesia [4]Research Collaboration Center for Biomass and Biorefinery,BRIN and Universitas Padjadjaran,Bandung,40600,Indonesia [5]Department of Agro-Industrial Technology,Universitas Padjadjaran,Bandung,40600,Indonesia

出　　处：《Journal of Renewable Materials》2024年第8期1383-1397,共15页可再生材料杂志（英文）

基　　金：funded by Riset dan Inovasi untuk Indonesia Maju(RIIM)National Riset and Innovation Agency(Grant Numbers:4/IV/KS/05/2023 and 13955/IT3/PT.01.03/P/B/2023);Research Program by Research Organization of Nanotechnology and Materials,National Research and Innovation Agency(Grant Number 20/III.10/HK/2024).

摘　　要：Molasses can serve as a natural adhesive for plywood and particleboard.However,several disadvantages remain,including lower dimensional stability and low bonding strength compared to other adhesives.Therefore,modifications are needed to use molasses as an adhesive for plywood.This research aims to improve bio-based molasses(MO)adhesive for plywood using citric acid(CA)adhesive.In addition,this research aims to analyze the effect of adding citric acid and to investigate the optimum hot-pressing temperature to produce the best quality plywood.In the first stage,the molasses and citric acid were combined in a ratio of 100:0,75:25,50:50,25:75,0:100 w/w%.Then,the second stage focuses on analyzing the influences of pressing temperature based on an optimum first stage.The research demonstrated that the addition of CA altered the gelation time,solid content,viscosity,and pH of the molasses adhesives.In addition,the thermal properties of molasses adhesives were changed after mixing with citric acid.These phenomena indicate changes in characteristics,such as the curing of adhesive.Overall,the characteristics of plywood showed a steady improvement as the CA ratio increased but revealed a significant decline for the 25:75 MO-CA ratio.By raising the pressing temperature from 180℃ to 200℃,the quality of plywood was effectively improved.The plywood that was bonded using adhesives with a 50:50 MO-CA ratio exhibited superior mechanical properties and improved dimensional stability compared to the plywood bonded solely with MO.Furthermore,the optimal mechanical and physical properties resulted in plywood bonded with a 50:50 MO-CA ratio when subjected to a pressing temperature of 200℃.The Thermal and FTIR measurements revealed that CA established ester bonds with both the MO and wood veneers.In conclusion,the mechanical characteristics of plywood were improved,while maintaining its excellent dimensional stability.

关 键 词：Citric acid composite MOLASSES pressing temperature PLYWOOD 

分 类 号：TQ43[化学工程]