水性无机耐高温防腐涂料的研制  

Development of waterborne inorganic high-temperature resistant anticorrosive coatings

作　　者：王秀玲[1,2] 王凤 Wang Xiuling;Wang Feng(Suzhou University of Science and Technology,Suzhou 215009;Chongqing Aipu Anticorrosion Technology Co.,Ltd.,Chongqing 402260)

机构地区：[1]苏州科技大学,苏州215009 [2]重庆艾普防腐技术有限公司,重庆402260

出　　处：《化工新型材料》2024年第10期273-275,共3页New Chemical Materials

基　　金：国家自然科学基金(21705115);江苏自然科学基金项目(BK20170378);重庆市科技局排气管项目(2020.10—2021.10)。

摘　　要：以硅烷KH560、甲基三甲氧基硅烷偶联剂、气相二氧化硅和氢氧化钾为主要原料合成水性无机耐高温树脂,为提高涂料的耐热性,选择铜铬黑、磷酸锌、碳酸镁作为主要颜填料,并选用抗开裂粉料、消泡剂、分散剂等提高涂层外观及涂料的施工性能等。结果表明,该涂料有机挥发物低于100mg/L,涂层能在200℃固化成膜,700℃煅烧2h仍具有良好的防腐性能,且附着力好、耐盐雾性能良好。Waterborne inorganic high-temperature resistant resin was synthesized with silane KH560,methyltrimethoxysilane coupling agent,fumed silica and potassium hydroxide as the main raw materials.In order to improve the heat resistance of the coating,copper chrome black,zinc phosphate and magnesium carbonate were selected as the main pigments and fillers,and anti-cracking powder,defoamer and dispersant were used to enhance the appearance of the coating and the construction performance of the coating.The test results showed that the organic volatile compound of the coating was less than 100mg/L.The coating could be cured at 200℃and still maintain good corrosion resistance after being calcined at 700℃for 2h.It also exhibited good adhesion and good salt spray resistance.

关 键 词：耐高温涂料 水性涂料 树脂 高温性能 

分 类 号：TQ637.6[化学工程—精细化工]