基于烧结机台车力学情况的路线偏离检测分析  

Analysis of Route Deviation Detection Based on the Mechanical Conditions of Sintering Machine Vehicles

作　　者：强发文 Qiang Fawen(Tangshan Branch of HBIS Group Supply Chain Management Co.,Ltd.,Tangshan Hebei 063000,China)

机构地区：[1]河钢集团供应链管理有限公司唐山分公司,河北唐山063000

出　　处：《山西冶金》2024年第8期184-185,188,共3页Shanxi Metallurgy

摘　　要：针对因烧结机台车路线偏离导致烧结质量差、效率低的问题,根据高精度和高效率要求进行路线偏离检测分析。以某钢厂烧结机台车为例,通过对装置运行期间受力状态进行分析,分多次检测烧结机台车,并根据检测结果判断故障,剖析原因,提出了路线偏离控制方法,确保台车安装基准,优化台车配重。实践表明,采取多种控制措施后,烧结机台车回正,路线偏离检测对台车运行状态控制有指导意义。In response to the problem of poor sintering quality and low efficiency caused by the deviation of the sintering machine trolley route,a route deviation detection analysis is carried out according to the requirements of high precision and high efficiency.Taking the sintering machine trolley of a certain steel plant as an example,the force state during the operation of the device was analyzed,and the sintering machine trolley was tested multiple times.Based on the test results,the faults were judged,the reasons were analyzed,and a route deviation control method was proposed to ensure the installation benchmark of the trolley and optimize the counterweight of the trolley.Practice has shown that after taking various control measures,the sintering machine trolley can return to its original position,and the detection of route deviation has guiding significance for the control of the trolley's operating status.

关 键 词：烧结机 台车跑偏 机理 跑偏调整 维护检修 

分 类 号：TF046[冶金工程—冶金物理化学]