双边LCC拓扑磁耦合机构补偿网络参数设计方法  

Design Method of Compensation Network Parameters for Bilateral LCC Topological Magnetic Coupling Mechanism

作　　者：张博雨 张晓丽 冯睿 张照博 蔡思淇 马晓轩 ZHANG Boyu;ZHANG Xiaoli;FENG Rui;ZHANG Zhaobo;CAI Siqi;MA Xiaoxuan(Guangzhou Petroleum Training Center Co.,Ltd.,Guangzhou 510000,Guangdong,China;Xu Ji Power Co.,Ltd.,Xuchang 461000,Henan,China;China National Petroleum Company Limited Guangdong Sales Branch,Guangzhou 510000,Guangdong,China)

机构地区：[1]广州石油培训中心有限公司,广东广州510000 [2]许继电源有限公司,河南许昌461000 [3]中国石油天然气股份有限公司广东销售分公司,广东广州510000

出　　处：《电气传动》2024年第10期32-38,49,共8页Electric Drive

摘　　要：基于磁耦合谐振式技术原理,采用一种双边LCC拓扑补偿网络参数设计方法。首先对双边LCC拓扑主电路数学模型进行分析,设定线圈自感与串联补偿电感的电感比值。然后通过编写M文件和搭建Simu⁃link仿真平台,根据电感比值与效率之间的关系,找到最优效率点。最后搭建全SiCMOSFET器件系统实验平台进行验证。实验结果表明,通过设置合适的电感比值,在满功率偏移范围内,耦合机构效率能够保持在95%左右,系统最大效率大于92.5%,证明了该补偿网络参数设计方法是有效的。Based on the principle of magnetic coupling resonance technology,a bilateral LCC topology compensation network parameter design method was adopted.Firstly,the mathematical model of the main circuit of the bilateral LCC topology was analyzed,and the inductance ratio of the coil self-inductance and the series compensation inductance was set.Then,by writing an M file and building a Simulink simulation platform,according to the relationship between inductance ratio and efficiency,found the optimal efficiency point.Finally,a all-SiC MOSFET device system experimental platform was built for verification.The experimental results show that the efficiency of the coupling mechanism can be maintained at about 95%and the maximum efficiency of the system is more than 92.5%in the range of full power offset by setting the appropriate inductance ratio,which proves that the compensation network parameter design method is effective.

关 键 词：磁耦合谐振 双边LCC拓扑 电感比值 SICMOSFET器件 耦合机构效率 

分 类 号：TM28[一般工业技术—材料科学与工程]