基于径迹长度估计法的函数展开计数法在蒙特卡罗程序RMC中的实现和优化  

Implementation and Optimization of Function Expansion Tallies Based on Track Length Estimation Method in RMC

作　　者：安南 王武 王侃[1] An Nan;Wang Wu;Wang Kan(Department of Engineering Physics,Tsinghua University,Beijing,100084,China)

机构地区：[1]清华大学工程物理系,北京100084

出　　处：《核动力工程》2024年第5期78-84,共7页Nuclear Power Engineering

基　　金：国防科技工业核动力技术创新中心项目(HDLCXZX-2021-HD-034)。

摘　　要：传统的蒙特卡罗模拟通常采用分箱计数的方式来进行相关参数统计,粗糙的计数箱划分难以精确地描述一些参数在整个空间中的分布,而细致的计数箱划分则需很大的样本数才能得到满足要求的统计精度,将花费大量的时间。函数展开计数方法(FET方法)可以得到参数在求解空间中的连续分布,并能解决计算效率和精度无法兼得的问题。在蒙特卡罗程序RMC中创新地实现了基于径迹长度估计的FET方法,结合勒让德多项式和泽尼克多项式计算参数在三维组件中的连续分布,同时对比了FET方法与网格计数法的计算耗时。研究结果表明,FET方法的计算结果与网格计数法符合很好,并且计算时间相比网格计数法有所降低,内存占用大大降低。本研究开发的FET方法可用于蒙特卡罗程序的计数研究。Traditional Monte Carlo simulations usually use bin-counting to statistically analyze relevant parameters.Rough bin division is difficult to accurately describe the distribution of some parameters in the whole space,while detailed bin division requires a large number of samples to meet the required statistical accuracy,which will take a lot of time.The functional expansion tallies method(FET method)can obtain the continuous distribution of parameters in the solution space,and can solve the problem that computational efficiency and accuracy cannot be achieved at the same time.The FET method based on track-length estimation is innovatively implemented in Monte Carlo Code(RMC).In addition,the Legendre polynomials and Zernike polynomials are combined to calculate the continuous distribution of the parameters in the three-dimensional assembly space.At the same time,the simulation time of FET method and meshtally method are compared.The results show that the calculation results of FET method are in good agreement with the meshtally method,and the simulation time of FET method is reduced while the simulation memory is greatly reduced.Therefore,the functional expansion tallies method developed in this study can be used in Monte Carlo code.

关 键 词：RMC 函数展开计数方法(FET方法) 径迹长度估计 三维组件空间函数展开 

分 类 号：TL329.2[核科学技术—核技术及应用]