材料辐照用分段式气隙耦合电加热试验装置研制  

Development of Segmented Air-gap Coupled Electric Heating Test Device for Material Irradiation

作　　者：黄岗[1,2] 斯俊平 孙胜 金帅[1] 彭星杰 童明炎 彭芳[1] Huang Gang;Si Junping;Sun Sheng;Jin Shuai;Peng Xingjie;Tong Mingyan;Peng Fang(Nuclear Power Institute of China,Chengdu,610213,China;School of Energy and Power Engineering,Chongqing University,Chongqing,400044,China)

机构地区：[1]中国核动力研究设计院,成都610213 [2]重庆大学能源与动力工程学院,重庆400044

出　　处：《核动力工程》2024年第5期165-170,共6页Nuclear Power Engineering

基　　金：中国核动力研究设计院原创基金(KJCX-2022-YC2-19);中核集团青年英才项目(JTYC-JY-2022-0101)。

摘　　要：为了解决研究堆高释热率区材料辐照温度精确控制技术难题,研制了材料辐照用分段式气隙耦合电加热试验装置。试验装置采用轴向分段式气隙耦合电加热的辐照温度控制方法,使其具有较大的温度调节能力。装载材料样品的辐照试验段采用轴向分段式阴阳面独立分区的结构,由两段4个独立腔室组成,每个腔室设置独立的惰性气体调节回路,并且在第一段两个腔室内设置电加热棒辅助气隙进行辐照温度调节。利用该装置进行的堆内辐照试验结果表明:试验装置在反应堆高注量率区能够将材料辐照温度有效控制在335~365℃,电加热棒独立控温能力达30℃。研制的装置大幅提高了辐照温度控制精度,实现了辐照温度在线精确调节与控制,达到了材料辐照精细化控温的目的。In order to solve the technical problem of precise control for the material irradiation temperature in high heat release rate region of the research reactor,the segmented air-gap coupled electric heating test device for the material irradiation was developed.The irradiation temperature control method of axial segmented air gap coupling electric heating was adopted to enable the irradiation device to have a large temperature regulation ability.The structure of axial segmented yin-yang plane independent partition was adopted in the test device.The irradiation test section loaded with material samples was composed of four independent chambers,each of which was equipped with an independent inert gas regulating circuit,and the two chambers on the first segment were equipped with the electric heating rod auxiliary air gap for the irradiation temperature regulation.This device was used to carry out irradiation test in the research reactor,and the results show that the material irradiation temperature for the test device can be effectively controlled at 335~365℃in high flux rate region of the research reactor,and the independent temperature control ability of the electric heating rod can reach 30℃.The developed device greatly improves the accuracy of irradiation temperature control,realizes on-line accurate adjustment and control of irradiation temperature,and achieves the purpose of fine temperature control for material irradiation.

关 键 词：研究堆 材料辐照 气隙耦合电加热 辐照温度 试验装置 

分 类 号：TL375.6[核科学技术—核技术及应用] TK124[动力工程及工程热物理—工程热物理]