检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:潘东 施天成 王绪利 种亚林 李敬如 罗金山 侯四维 PAN Dong;SHI Tiancheng;WANG Xuli;CHONG Yalin;LI Jingru;LUO Jinshan;HOU Siwei(State Grid Anhui Electric Power Co.,Ltd.Economic and Technological Research Institute,Hefei 230022,China;State Grid Economic and Technological Research Institute Co.,Ltd.,Beijing 102209,China;Shanghai Boying Information Technology Co.,Ltd.,Shanghai 200240,China)
机构地区:[1]国网安徽省电力有限公司经济技术研究院,合肥230022 [2]国网经济技术研究院有限公司,北京102209 [3]上海博英信息科技有限公司,上海200240
出 处:《人工智能科学与工程》2024年第3期59-66,共8页ARTIFICIAL INTELLIGENCE SCIENCE AND ENGINEERING
基 金:国网安徽省电力有限公司科技项目资助(521209230004)。
摘 要:受农村地区环境复杂气候多变的影响,终端设备容易出现温度异常情况。在传感器采集和信号传输过程中,电磁干扰、传输信号衰减等因素会干扰温度信号真实频率特征,导致其带有噪声,且难以准确识别异常频率成分,无法精准监测温度异常状态。为此,提出基于光纤传感的农村分布式综合能源系统终端设备状态实时监测方法。在终端设备中通过部署光纤传感器,利用光纤传感技术进行分离处理可以有效降低干扰因素对真实温度信号的影响,获取终端设备的关键温度参数,使用光纤光栅动态信号处理技术,对以上参数进行傅里叶级数分解,避免噪声的干扰对温度异常监测的影响,分析终端设备的周期性、瞬变性等动态信息,并对上述信息实时洞察细微变化,获取设备当前运行状态温度,实现农村分布式综合能源系统终端设备状态的实时监测。利用FlexSim软件构建晴朗、阴雨、雷暴、大风4种模拟实验环境,收集农村分布式综合能源系统终端设备的实际温度数据,对风力发电机温度进行监测,在4种天气条件下,设计方法更接近实际值,证明设计方法能够有效抵御复杂多变天气的影响,实现设备温度的精准监测。The environmental conditions in rural areas are complex and variable,and the climate has an impact,making terminal equipment prone to temperature anomalies.During the process of sensor acquisition and signal transmission,temperature signals are affected by factors such as electromagnetic interference and transmission signal attenuation,resulting in noise and interference with their true frequency characteristics.It is difficult to accurately identify abnormal frequency components and monitor temperature anomalies accurately.To this end,a real-time monitoring method for the terminal equipment status of rural distributed comprehensive energy systems based on fiber optic sensing is proposed.By deploying fiber optic sensors in terminal devices and utilizing fiber optic sensing technology,separation and processing can effectively reduce the impact of these interferences on the real temperature signal,obtain the key temperature parameters of the terminal device,use fiber optic grating dynamic signal processing technology to perform Fourier series decomposition on the above parameters,avoid the impact of noise interference on temperature anomaly monitoring,analyze the periodic and transient dynamic information of the terminal device,and observe subtle changes in real-time to obtain the current operating temperature of the device,achieving real-time monitoring of the terminal device status of the rural distributed comprehensive energy source system.Using FlexSim software to construct four simulated experimental environments:sunny,rainy,thunderstorm,and strong wind,collect actual temperature data of rural distributed comprehensive energy system terminal equipment,and monitor the temperature of wind turbines.Under the four weather conditions,the design method is closer to the actual value,proving that the design method can effectively resist the influence of complex and variable weather,and achieve accurate monitoring of equipment temperature.
分 类 号:TP277[自动化与计算机技术—检测技术与自动化装置]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7