检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:武金江 赵广迪 姜昊源 孙乙轩 王博 Wu Jinjiang;Zhao Guangdi;Jiang Haoyuan;Sun Yixuan;Wang Bo(School of Materials and Metallurgy,University of Science and Technology Liaoning,Anshan 114051,China)
机构地区:[1]辽宁科技大学材料与冶金学院,辽宁鞍山114051
出 处:《稀有金属材料与工程》2024年第8期2205-2216,共12页Rare Metal Materials and Engineering
基 金:国家自然科学基金(51904146)。
摘 要:变形前的加热工艺对高温合金的热加工性能具有重要影响。本研究通过开展等温加热实验研究了难变形高温合金U720Li中γ'相特征及晶粒组织随加热温度及保温时间的演变行为,进而为改善其热加工性能提供理论指导。为了更准确地描述γ'相和晶粒的特征,本实验采用电解腐蚀与化学腐蚀试样相结合的方法开展研究。结果表明,一次γ'的面积分数及尺寸随加热温度的升高及保温时间的延长逐渐减小。细小二次γ'比粗大一次γ'更易溶解,前者在1100℃保温30 min就可完全溶解,而后者在1180℃保温30 min才能完全溶解;一次γ'的不断溶解减弱了其对晶界的钉扎作用,导致合金的平均晶粒尺寸随加热温度升高及保温时间的延长逐渐增大,且在1180℃(高于γ'溶解温度)短时保温就发生了晶粒异常长大现象,形成混晶组织。最后,根据不同加热条件的晶粒长大行为,建立了U720Li合金在1050~1160℃的晶粒长大动力学模型。The heating process before deformation has a significant influence on the hot workability of superalloys.The evolution behavior ofγ′characteristic and grain structure with the heating temperature and holding time in hard-deformed superalloy U720Li were studied by isothermal heating experiments.The results show that the area fraction and size of primaryγ′decrease with the increase in heating temperature and holding time.The dissolution of fine secondaryγ′is easier than that of the coarse primaryγ′.The former can be completely dissolved after holding at 1100℃for 30 min,while the latter can be completely dissolved after holding at 1180℃for 30 min.The continuous dissolution of primaryγ′weakens its pinning effect on grain boundaries,causing the average grain size to gradually increase with the increase in heating temperature and holding time.Moreover,as the temperature increases to 1180℃(higher thanγ′dissolution temperature),the grains undergo abnormal growth in a short space of time,forming a mixed grain structure.Finally,according to the grain growth behavior under different heating conditions,a grain growth kinetic model for U720Li alloy is established.
分 类 号:TG146.15[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49