检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:罗海威 马立群 李媛 郭青青 刘羽玲 刘显勇 王忠强 刘冰肖 LUO Hai-wei;MA Li-qun;LI Yuan;GUO Qing-qing;LIU Yu-ling;LIU Xian-yong;WANG Zhong-qiang;LIU Bing-xiao(Guangdong Sinoplast Advanced Plastic Co.Ltd.,Dongguan 523860,Guangdong,China;Taiyuan Institute of Technology,Taiyuan 030051,Shanxi,China)
机构地区:[1]广东中塑新材料股份有限公司,广东东莞523860 [2]太原工业学院,山西太原030051
出 处:《合成材料老化与应用》2024年第4期29-31,共3页Synthetic Materials Aging and Application
基 金:2023年中塑公司-太原工业学院产学研合作项目(项目编号:820668)。
摘 要:以己二胺和间苯二甲酰氯为原料,采用界面聚合+固相缩聚法制备得到了聚间苯二甲酰己二胺(PA6I),并着重对其聚合工艺进行了探究。通过分析界面聚合类型、间苯二甲酰氯和己二胺的浓度、反应温度、缚酸剂种类和用量以及界面聚合面积对其相对黏度和分子量的影响规律,得出了最佳聚合工艺:己二胺与间苯二甲酰氯的单体浓度为0.2 mol/L;反应温度为70℃;缚酸剂无水碳酸钠与反应单体的摩尔比为2:1;在此条件下,合成的尼龙6I的相对黏度可达到1.78。This article uses hexamethylene diamine and isophthaloyl chloride as raw materials to prepare Polyisophthaloylhexanediamine(PA6I)by interface polymerization and solid-phase condensation method,and focuses on exploring its polymerization process.By analyzing the influence of interface polymerization type,concentration of isophthaloyl chloride and hexamethylene diamine,reaction temperature,type and dosage of acid binding agent,and interface polymerization area on its relative viscosity and molecular weight,the optimal polymerization process was obtained:with a monomer concentration of 0.2 mol/L for hexanediamine and isophthaloyl chloride;the reaction temperature is 70°C;the molar ratio of anhydrous sodium carbonate as a binding agent to the reaction monomer is 2:1.The relative viscosity of nylon 6I synthesized under these conditions can reach 1.78.
分 类 号:TQ322.3[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7