基于主动活塞的输液泵检测仪流量校准系统研究  

Research on flow calibration system of infusion pump detector based on active piston

作　　者：王俊贤 黄震威 彭晓利 单剑 陈鑫宇 WANG Junxian;HUANG Zhenwei;PENG Xiaoli;SHAN Jian;CHEN Xinyu(College of Metrology Measurement and Instrument,China Jiliang University,Hangzhou 310018,China;Hangzhou Xinyue Technology Co.,Ltd.,Hangzhou 310018,China;Quzhou Market Supervision and Administration Bureau,Quzhou 324003,China)

机构地区：[1]中国计量大学计量测试与仪器学院,浙江杭州310018 [2]杭州鑫钥科技有限公司,浙江杭州310018 [3]衢州市计量质量检验研究院,浙江衢州324003

出　　处：《中国计量大学学报》2024年第3期384-389,421,共7页Journal of China University of Metrology

基　　金：浙江省科技计划项目(No.2022C01244)。

摘　　要：目的:研究一种基于主动活塞的输液泵检测仪溯源方法,并设计一体化活塞控制机械结构。方法:通过主动活塞产生稳定流量,采用西门子PLC1200结合LabVIEW平台进行监测和控制。结果:装置在5、600和1000 mL/h 3个流量点下采用称重法进行溯源,并对5 mL/h和1000 mL/h流量点的稳定性进行实验,实验结果表明输液泵检测仪检定装置在流量范围5~1000 mL/h中的瞬时流量与累计流量的相对误差均在0.25%以内。结论:输液泵检测仪流量校准控制系统的测量值准确可靠,整体结构设计紧凑,一体化程度高,使用便捷。可满足输液泵检测仪的检定要求。Aims:To study a traceability method of infusion pump tester based on active piston and design the integrated piston control mechanical structure.Methods:Stable flow rate generated by the active piston and monitored and controlled by Siemens PLC1200 combined with LabVIEW platform.Results:The device is traceable under the flow rate of 5 mL/h,600 mL/h and 1000 mL/h using the weighing method,and the stability of the flow rate of 5 mL/h and 1000 mL/h is experimented.The experimental results show that the relative error between the instantaneous flow and the cumulative flow of the infusion pump tester calibrating device in the flow rate of(5~1000)mL/h are less than 0.25%.The relative error of instantaneous flow and cumulative flow is within 0.25%.Conclusions:The measured value of the flow calibration control system for infusion pump tester is accurate and reliable,and the designed structure is compact,integrated and convenient to use.It meets the calibration requirements of infusion pump detector.

关 键 词：主动活塞 LABVIEW 称重法 控制系统 输液泵检测仪 监测系统 

分 类 号：TK313[动力工程及工程热物理—热能工程]