Thermal properties and high-temperature ablation of high-entropy (Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) coating on graphite substrate  

作　　者：Ana C.Feltrin Daniel Hedman Farid Akhtar 

机构地区：[1]Division of Materials Science,Lulea University of Technology,Lulea 97187,Sweden [2]Center for Multidimensional Carbon Materials(CMCM),Institute for Basic Science(IBS),Ulsan 44919,Republic of Korea

出　　处：《Journal of Advanced Ceramics》2024年第8期1268-1281,共14页先进陶瓷（英文）

基　　金：This work was supported by the Swedish Foundation for Strategic Research(SSF)for Infrastructure Fellowship(No.RIF14-0083);The authors thank Lars Frisk for the ablation setup and testing and for the coefficient of thermal expansion measurements.The authors also acknowledge the Lulea Material Imaging and Analysis(LUMIA)Center for providinggthe imaging characterization equipment.Daniel’Hedman acknowledges financial support from the Institute for Basic Science,Republic of Korea(No.IBS-RO19-DI);The authors would like to acknowledge the computational resources provided by the National Academic Infrastructure for Supercomputing in Sweden(NAISS)via the NAISS 2023/3-31 and NAISS 2023/6-292 projects,which were partially funded by the Swedish Research Council(No.2022-06725);In addition,computational resources were provided by the Institute for Basic Science(Republic of Korea)at the HPC clusters Cimulator(CMCM,Ulsan)and Olaf(IBS-HQ,Daejeon).

摘　　要：An entropy-stabilized multicomponent ultrahigh-temperature ceramic(UHTC)coating,(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2),on a graphite substrate was in-situ sintered by spark plasma sintering(SPs)from constituent transition metal diboride powders.The(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) coating had a hardness of 31.2±2.1 GPa and resisted 36.9 GPa of stress before delamination,as observed at the interface.The temperature-dependent thermal properties of the multicomponent diboride(Ti_(0.25)V_(0.25)Zr_(0.25)Hf_(0.25))B_(2) were obtained by molecular dynamics(MD)simulations driven by a machine learning force field(MLFF)trained on density functional theory(DFT)calculations.The thermal conductivity,density,heat capacity,and coefficient of thermal expansion obtained by the MD simulations were used in time-dependent thermal stress finite element model(FEM)simulations.The low thermal conductivity(<6.52 W·m^(-1)·K^(-1))of the multicomponent diboride coupled with its similar coefficient of thermal expansion to that of graphite indicated that stresses of less than 10 GPa were generated at the interface at high temperatures,and therefore,the coating was mechanically resistant to the thermal stress induced during ablation.Ablation experiments at 220℃ showed that the multicomponent diboride coating was resistant to thermal stresses with no visible cracking or delamination.The ablation mechanisms were mechanical denudation and evaporation of B_(2)O_(5) and light V-Ti oxides,which caused a decrease in the mass and thickness of the coating and resulted in mass and linear ablation rates of-0.51 mg·s^(-1) and -1.38μm·s^(-1),respectively,after 60 s.These findings demonstrated the thermal and mechanical stability of multicomponent entropy-stabilized diborides as coatings for carbon materials in engineering components under extreme environments.

关 键 词：entropy-stabilized diborides ultrahigh temperature ceramics molecular dynamics(MD)simulations density functional theory(DFT) ablation properties 

分 类 号：TM282[一般工业技术—材料科学与工程]