Performance analysis of a tuned point absorber using SPH calm water and wave tank simulations  

作　　者：Kaveh Soleimani Mohammad Javad Ketabdari 

机构地区：[1]Department of Maritime Engineering,Amirkabir University of Technology,Tehran,Iran

出　　处：《Journal of Ocean Engineering and Science》2024年第5期409-436,共28页海洋工程与科学（英文）

摘　　要：In this paper,two smoothed particle hydrodynamics(SPH)models,namely SPH-W and SPH-C were used to evaluate the motion response of a point absorber wave energy converter(WEC).In the SPH-W model,a long wave flume was constructed and a long simulation was performed to obtain the motion response of the WEC.In the SPH-C model,the SPH method is only used to find the hydrodynamic coefficients of the device by analysing a few seconds of free-decaying motion of WEC in calm water in a much smaller numerical flume.Then,these coefficients were inserted in the equation of motion of a heaving WEC that was solved using a 4th order Runge-Kutta(ODE45)solver in MATLAB.First,the energy conservation property of the WCSPH model was examined through a standing wave benchmark test.Then,the wavepoint absorber interaction was simulated.While the simulation time for SPH-C model is much smaller than that of SPH-W,it gave almost similar results for the motion response of WEC.These two models were used to evaluate the effects of the control force and the draft of a cone-cylinder point absorber on its hydrodynamic responses.The results showed that compared to the effect of the supplementary inertia,changes in the draft of the WEC have a small influence on its hydrodynamic responses.The buoy draft has an inverse relationship with both added mass and damping coefficients.However,increasing the supplementary mass increases the added mass and decreases the hydrodynamic damping coefficients.

关 键 词：Point absorber Power take-off Control forces SPH wave tank test SPH calm water test DualSPHysics 

分 类 号：P731.22[天文地球—海洋科学]