基于正交试验的金刚石锯片刀头热压烧结工艺研究  

Research on hot pressing sintering process of cutter head based on orthogonal experiment

作　　者：丁紫阳 DING Ziyang(School of New Materials Engineering,Zhengzhou Technical College,Zhengzhou 450121,Henan,China;Henan Diamond Material Intelligent Manufacturing Engineering Research Center,Zhengzhou 450121,Henan,China)

机构地区：[1]郑州职业技术学院新材料工程学院,河南郑州450121 [2]河南省金刚石材料智能制造工程研究中心,河南郑州450121

出　　处：《四川冶金》2024年第5期31-35,共5页Sichuan Metallurgy

基　　金：河南省高等学校重点科研项目:面向高端超硬材料制品金刚石锯片的全自动激光焊接关键技术研究(项目编号:23B430018)。

摘　　要：为提升热压烧结金刚石锯片刀头的性能,降低刀头激光焊接难度,满足工程实践对金刚石锯片刀头质量的要求,设计正交试验,通过极差分析研究了烧结工艺对金刚石锯片刀头胎体致密度的影响规律,并且通过SEM显微组织分析、硬度、抗弯强度测试验证了正交试验结果。研究得出:烧结温度对金刚石锯片刀头胎体致密度影响最为显著、烧结压力的影响次之、保温时间的影响最小,并且在正交试验最优工艺参数条件下,刀头胎体硬度、抗弯强度达到最大值。In order to improve the performance of hot pressed sintered diamond saw blade heads,reduce the difficulty of laser welding of the blade heads,and meet the quality requirements of engineering practice for diamond saw blade heads,an orthogonal experiment was designed to study the influence of sintering technology on the density of the diamond saw blade head matrix through range analysis.The orthogonal experiment results were verified by SEM microstructure analysis,hardness,and bending strength testing.The study found that sintering temperature has the most significant effect on the density of diamond saw blade body,followed by sintering pressure,and the effect of insulation time is the smallest.Moreover,under the optimal process parameters of orthogonal experiment,the hardness and bending strength of the blade body reach their maximum values.

关 键 词：正交试验 金刚石锯片 热压烧结 刀头胎体 工艺 

分 类 号：TF124[冶金工程—粉末冶金]