卷烟生产过程中焦油稳定性关键影响因素研究  

作　　者：郭阳[1] 汪涛[1] 宁程彬 刘向胜 程德强 王宇[1] 刘先成[1] 许志强[1] 

机构地区：[1]安徽中烟工业有限责任公司阜阳卷烟厂,安徽阜阳236020

出　　处：《科技创新与应用》2024年第31期50-53,58,共5页Technology Innovation and Application

摘　　要：为探索卷烟生产过程各因素对卷烟焦油稳定性的影响,采用单因素试验方法,分析切丝宽度、切丝水分、烟丝混合均匀度、梗丝加工工艺、烟支重量及劈刀盘规格对卷烟焦油批内均匀性和批间稳定性的影响。方差分析及T检验结果表明,切丝宽度不同对卷烟焦油的批间稳定性有显著性影响,试验范围内,随着切丝宽度的增加,批间焦油量减小;试验范围内,切丝水分、烟丝混合均匀度及梗丝加工工艺影响卷烟焦油的批内均匀性;烟支重量不同对卷烟焦油批间稳定性有显著性影响,随着烟支重量增加,焦油量增大;重量稳定的前提下,劈刀盘规格不同影响烟支密度的均匀性,从而影响卷烟焦油的批间稳定性和批内均匀性。In order to explore the influence of various factors in the cigarette production process on the stability of cigarette tar,a single-factor test method was used to analyze the effects of cut width,cut hydration content,cut tobacco mixing uniformity,stem processing technology,cigarette weight and cleaver disk specifications on the intra-batch uniformity and inter-batch stability of cigarette tar.The results of variance analysis and T-test showed that:Different cut width had a significant impact on the inter-batch stability of cigarette tar.Within the test range,with the increase of cut width,the amount of tar between batches decreased;Within the test range,the moisture content of the cut,the mixing uniformity of cut tobacco and the processing technology of cut stem affected the intra-batch uniformity of cigarette tar;Different cigarette weights had a significant impact on the inter-batch stability of cigarette tar.As the cigarette weight increased,the amount of tar increased;Under the premise of stable weight,different specifications of the cleaver disc affect the uniformity of cigarette density,thereby affecting the stability of cigarette tar between batches and the uniformity within batches.

关 键 词：切丝宽度 切丝含水率 烟丝混合均匀度 梗丝加工工艺 实物利用率 烟支重量 劈刀盘 焦油稳定性 

分 类 号：TS452[农业科学—烟草工业]