基于HRV的受限空间内装配人员作业疲劳研究  

Research on Assembly Personnel's Fatigue in Confined Space Based on HRV

作　　者：黄馨怡 易灿南[1] 刘逸帆 龙彬 马鹏 冷成杰 HUANG Xin-yi;YI Can-nan;LIU Yi-fan;LONG Bin;MA Peng;LENG Cheng-jie(School of Safety and Management Engineering,Hunan Institute Technology,Hengyang 421002,China)

机构地区：[1]湖南工学院安全与管理工程学院,衡阳421002

出　　处：《价值工程》2024年第30期23-25,共3页Value Engineering

基　　金：国家级大学生创新创业训练计划项目,项目编号(S202311528022,S202411528046);湖南省自然科学基金资助项目,项目编号(2020JJ4263,2024JJ5122)。

摘　　要：为了解受限空间内装配人员作业过程疲劳特征,避免疲劳累积,设计并组织扳手旋紧螺栓试验。招募10名男大学生进行试验,测量不同作业高度(120cm、140cm)和不同工作面(侧面、顶面、正面)下装配人员心率变异性数据(HRV),并记录主观疲劳评分。然后,利用统计学方法分析装配过程中作业人员疲劳特征。结果表明,作业高度显著影响NNMean、RMSSD、HF%和LF/HF以及主观疲劳评分,但工作面影响不显著,且无二阶效应。受限空间内装配人员旋紧螺丝作业中,不同工作面下疲劳发展差异不显著,140cm作业高度下疲劳累积明显高于120cm高度。In order to explore the fatigue characteristics of assembly personnel in confined space during operation and avoid fatigue accumulation,the test of wrench tightening bolt was designed and organized.Ten male college students were recruited for the experiment.The heart rate variability(HRV)data of the assembly personnel under different working heights(120cm,140cm)and different working faces(side,top,front)were measured,and the subjective fatigue ratings was recorded.Then,the fatigue characteristics of workers in the assembly process are analyzed by statistical methods.The results showed that the working height significantly affected NNMean,RMSSD,HF%,LF/HF and subjective fatigue score,but the influence of working face was not significant,and there is no second-order effect.In the screw tightening operation of assembly personnel in confined space,there is no significant difference in fatigue development under different working faces,and the fatigue accumulation at 140 cm working height is significantly higher than that at 120cm height.

关 键 词：装配作业 受限空间 疲劳 心率变异性 

分 类 号：X914[环境科学与工程—安全科学]