检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张昭 周立宪 刘胜春 ZHANG Zhao;ZHOU Lixian;LIU Shengchun(China Electric Power Research Institute,Beijing 102400,China)
机构地区:[1]中国电力科学研究院有限公司,北京102400
出 处:《电网与清洁能源》2024年第8期11-17,共7页Power System and Clean Energy
基 金:国家电网有限公司科技项目(SGZB0000TGJS2201151);中国电力科学研究院有限公司自筹研究开发项目(GC83-22-002)。
摘 要:线夹螺栓松动导致的防振锤滑移问题普遍存在于架空输电线路中。为研究影响防振锤线夹螺栓松动的关键因素,分析了螺栓松动的主要原因,建立了横向振动条件下导线对防振锤线夹的激振力模型,在理论分析的基础上结合工程实际确定了影响螺栓松动的主要参数。通过正交试验获得各因素不同水平组合条件下螺栓紧固力矩的衰减值,并对其进行极差分析和方差分析,明确了各因素对螺栓松动影响的主次顺序、显著性及显著水平。结果表明,防振锤振动频率越高、振幅越大螺拴越容易松动,与工程实际相符,从而验证了所确定因素的关键性和合理性,可为工程实践提供理论和技术方面的支撑。The aeolian vibration damper sliding caused by looseness of clamp bolts is commonly present in the overhead transmission lines.To study the key factors that affect the looseness of those bolts,the main reasons for bolt looseness are explored.A model of the excitation force of the cable on the damper clamp under lateral vibration conditions is established,and the main parameters that affect bolt looseness are determined based on theoretical analysis and engineering practice.The attenuation values of bolt tightening torque under different combinations of factors and levels are obtained through orthogonal experiments,and range analysis and variance analysis are conducted to clarify their order,significance,and significance level of the influence of each factor on bolt loosening.The experimental analysis results are consistent with the engineering practice,verifying the criticality and rationality of the determined factors,and providing theoretical and technical support for engineering.
分 类 号:TM726.3[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.15.3.240