悬浮床加氢裂化工艺下不同比例油煤共炼的研究  

Study on co-refining of oil and coal under different proportions in suspended bed hydrocracking process

作　　者：魏江涛 李晓宏 高伟 毛吉会 方玉虎 郭彦新 Wei Jiangtao;Li Xiaohong;Gao Wei;Mao Jihui;Fang Yuhu;Guo Yanxin(Hydrocarbon High-efficiency Utilization Technology Research Center,Shaanxi Yanchang Petroleum(Group)Co.,Ltd.,Xi'an 710000,China)

机构地区：[1]陕西延长石油(集团)有限责任公司碳氢高效利用技术研究中心,陕西西安710000

出　　处：《炼油与化工》2024年第5期25-27,共3页Refining And Chemical Industry

基　　金：“碳氢资源高效利用技术研究平台运行维护升级改造”项目,陕西延长石油西北化工研究院(ycys2024ptjs-B-02)。

摘　　要：为了探索劣质重油作为原料与煤共炼的反应效果和可行性,将FCC油浆和DCC重油按照不同比例混合组成原料油,再与煤粉混合成浆,利用陕西延长石油集团开发的0.15 t/d悬浮床加氢裂化工艺技术进行了试验研究。结果表明,原料中再逐步加入不同比例DCC重油,煤的转化率保持在89%~91%,虽然比纯FCC油浆和煤共炼转化效果稍低,但是总的液体收率相近。DCC重油中芳烃含量较高供氢性能较强,大于525℃渣油组分转化率与纯FCC油浆和煤共炼结果相差不大,保持在89%~91%,而沥青质转化率有所提高,保持在79%~82%,表明DCC重油作为煤油共炼的原料油是可行的。In order to explore the reaction effect and feasibility of co-refining of inferior heavy oil as feedstock with coal,an experimental research was conducted by mixing the feedstock oil formed by FCC slurry and DCC heavy oil in different proportionsto form slurry using the 0.15 t/d suspended bed hydrocracking technology developed by Shaanxi Yanchang Petroleum Group.The results showed that the conversion rate of coal remained at 89%~91%when DCC was gradually added into the feedstock.Although the conversion effect was slightly lower than that of pure FCC slurry and coal co-refining,the total liquid yield was similar.DCC heavy oil had higher aromatics content and stronger hydrogen supply performance,and the conversion rate of residual oil above 525℃was not much different from that of pure FCC slurry and coal co-refining,remaining in 89%~91%,while the asphaltene conversion rate was improved and remained in 79%~82%,which indicated that DCC heavy oil was feasible as feedstock oil for oil and coal co-refining.

关 键 词：DCC重油 FCC油浆 油煤共炼 加氢裂化 

分 类 号：TE665.6[石油与天然气工程—油气加工工程]