检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:朱俊龙 夏益青 李瑞 盛玉萍 陈晓超 张生怡 ZHU Junlong;XIA Yiqing;LI Rui;SHENG Yuping;CHEN Xiaochao;ZHANG Shengyi(School of Materials Science and Engineering,Sichuan University of Science&Engineering,Zigong 643000,China;Material Corrosion and Protection Key Laboratory of Sichuan Province,Zigong 643000,China;Sichuan Suenji Technology Co.,Ltd.,Suining 629000,China)
机构地区:[1]四川轻化工大学材料科学与工程学院,四川自贡643000 [2]材料腐蚀与防护四川省重点实验室,四川自贡643000 [3]四川素恩吉科技有限公司,四川遂宁629000
出 处:《四川轻化工大学学报(自然科学版)》2024年第5期9-14,共6页Journal of Sichuan University of Science & Engineering(Natural Science Edition)
基 金:四川省科学技术厅科技成果转移转化示范项目(2022ZHCG0080)。
摘 要:以4-马来酰亚胺基苯酚(4-HPMI)、2,2'-双[4-(4-氨基苯氧基苯基)]丙烷(BAPP)和多聚甲醛为原料,合成了含马来酰亚胺苯并噁嗪(NHPMI-bapp)。采用傅里叶变换红外光谱仪(FT-IR)和核磁共振(NMR)对单体的化学结构进行了表征,进一步采用差示扫描量热仪(DSC)表征了单体的聚合反应行为。与传统型的苯酚-二苯甲烷二胺型苯并噁嗪进行对比,结果表明马来酰亚胺基团的引入降低了能量势垒,使固化反应能够在更低温度下进行。采用热重分析仪(TGA)和动态热机械分析仪(DMA)对马来酰亚胺型苯并噁嗪聚合物进行热性能表征。结果表明,NHPMI-bapp具有较好的耐热性和热稳定性,5%和10%热失重温度分别为343℃和398℃,且在800℃时其残碳率高达47.6%,储能模量为2478 MPa,玻璃化转变温度为336℃。Benzoxazine containing maleimide(NHPMI-bapp)has been synthesized,using 4-maleimido phenol(4-HPMI),2,2'-bis[4-(4-aminophenoxy)phenyl]propane(BAPP)and polyoxymethylene as raw materials.The chemical structure of the monomer is characterized using Fourier transform infrared spectrometer(FT-IR)and nuclear magnetic resonance(NMR),and the polymerization behavior is characterized using differential scanning calorimeter(DSC).The results show that the introduction of maleimide groups lowers the energy barrier,allowing the curing reaction to occur at lower temperatures,compared with the traditional phenolbisphenol A-type benzoxazines.The thermal properties of the NHPMI-bapp polymer are characterized using thermogravimetric analyzer(TGA)and dynamic mechanical analysis(DMA),which shows that the NHPMI-bapp polymer exhibits good heat resistance and thermal stability,and the temperatures of 5%and 10%weight loss are 343℃and 398℃,respectively.Moreover,the residual carbon rate at 800℃is as high as 47.6%,the energy storage modulus is 2478 MPa,and the glass transition temperature is 336℃.
分 类 号:TQ323.1[化学工程—合成树脂塑料工业]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.223.97.46