检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈阳[1] 陶大军[1] 王立坤[1] 戈宝军[1] 李守鹏 Chen Yang;Tao Dajun;Wang Likun;Ge Baojun;Li Shoupeng(National and Local Joint Engineering Research Center of Large Machines and Heat Transfer Technology,Harbin University of Science and Technology,Harbin 150080,China)
机构地区:[1]大型电机电气与传热技术国家地方联合工程研究中心(哈尔滨理工大学),哈尔滨150080
出 处:《电工技术学报》2024年第20期6357-6370,共14页Transactions of China Electrotechnical Society
基 金:国家自然科学基金资助项目(51777048)。
摘 要:双并列转子永磁同步电机由于部分定子铁心和绕组的缺失,存在较大的转矩脉动,限制了其在并行对驱类机械装备中的应用。该文对双并列转子永磁电机转矩脉动产生机理进行分析,并提出了相应的抑制方法。对比了N-N型、N-S型两种转子结构,阐明了N-S型转子结构的优越性。在此基础上,开展了转矩脉动产生机理研究,按照影响因素不同,逐次分析了齿槽效应、端部效应、永磁齿轮效应以及绕组参数不对称对电机转矩脉动的作用机理,构建了各个转矩分量的解析表达式。通过有限元模型,验证了理论分析的正确性。针对产生转矩脉动的不同分量,提出了相应的抑制方法,其中抑制空载转矩可以通过优化电机的结构参数来实现,抑制纹波转矩可以通过优化绕组位置分布来实现。搭建样机实验平台,验证了分析模型的准确性。In extruder,two-roll mill,twin-screw pump and other parallel driving mechanical equipment,the current driving mode is an induction motor to drive the drive shaft,and the drive shaft transmits the torque to the driven shaft through the synchronous mechanical gear.This transmission mode has some problems,such as large system volume,low system efficiency,difficult sealing,and regular maintenance.Therefore,the dual-parallel rotor permanent magnet synchronous motor has gradually attracted attention.Due to the absence of partial stator core and windings,the dual-parallel rotor permanent magnet synchronous motor has a large torque ripple,which limits its application in parallel drive machinery.In this paper,the mechanism of torque ripple in dual-parallel rotor permanent magnet motor is analyzed,and the corresponding suppression methods are proposed.Firstly,the advantage of N-S type rotor is illustrated by comparing the N-N type and N-S type two rotor structures.On this basis,the mechanism of torque ripple is studied.According to the different influencing factors,the mechanism of cogging effect,end effect,permanent magnet gear effect and winding parameter asymmetry on the motor torque ripple are analyzed step by step,and the analytical expression of each torque component is constructed.Secondly,the correctness of theoretical analysis is verified by finite element model.According to the different components of torque ripple,the corresponding suppression methods are proposed.The suppression of no-load torque can be realized by optimizing the structure parameters of the motor,and the suppression of ripple torque can further be realized by optimizing the windings position distribution.Finally,a prototype test platform is built to verify the accuracy of the analytical model.The following conclusions can be drawn from the simulation analysis:(1)The torque ripple of dual-parallel rotor permanent magnet synchronous motor comes from four components,namely,cogging torque,end effect torque,permanent magnet gear transmission torque
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.52