旋转电机轴承电蚀损伤机理与缓解措施研究进展  

Research Progress on the Mechanism and Mitigation Measure of Electrical Corrosion Damage in Rotating Motor Bearings

作　　者：迟连强 张殿海[1] 赵俊清 任自艳[1] 陈德志[1] Chi Lianqiang;Zhang Dianhai;Zhao Junqing;Ren Ziyan;Chen Dezhi(Key Laboratory of Special Motors and High-Voltage Electrical Apparatus,Ministry of Education Shenyang University of Technology,Shenyang 110870,China)

机构地区：[1]沈阳工业大学教育部特种电机与高压电器重点实验室,沈阳110870

出　　处：《电工技术学报》2024年第20期6409-6430,共22页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金资助项目(51707125)。

摘　　要：随着现代电力电子技术与驱动电机的深度融合,由变频驱动系统所导致的电机轴电压和轴电流及其负效应-轴承电蚀,已成为轴承失效的主要模式之一。目前,对于旋转电机轴承电蚀损伤失效的确切机理尚不清楚,难以对轴承电寿命进行有效预测。在国家提出高端装备轴承可靠性提升的背景下,轴承电蚀故障已成为限制电机系统可靠性的关键问题。该文首先介绍了电机系统轴电压和轴电流的来源及分类,然后分析了轴承电蚀损伤典型故障以及电蚀损伤影响因素,总结了轴承电气模型及轴承电容计算方法的研究现状,最后讨论轴承电蚀损伤缓解技术,并根据目前的研究现状和面临的挑战,展望未来可能的研究方向。The bearing voltage and bearing current caused by variable frequency drive system and their negative effect of the bearing electrical erosion have become the main bearing failure modes.The exact mechanism of electrical-erosion failure of rotating motor bearings is unclear,and it is difficult to predict the electric life of bearings effectively.The electrical fault of bearings has become the key problem limiting the reliability of the motor system.This paper mainly summarizes the progress of research on the mechanism and mitigation measures for motor bearings’electrical erosion damage.Firstly,the source and classification of bearing voltage and current are introduced.The results show that electrical discharge machining(EDM)current and high-frequency circulating bearing current are the main causes of electric-erosion damage and shortening of bearing life.Bearing damage caused by electrical erosion mainly includes frosting,pitting,fluting,white etching cracks(WEC),and lubricating oil degradation.Frosting and pitting damage are early failures with little influence on bearing operation.The appearance of fluting and WEC leads to greater vibration and noise of bearings,and the bearing life decreases sharply.The factors influencing bearing corrosion damage are analyzed,including speed,lubricating oil,power supply excitation,motor structure parameter,temperature,load,etc.According to the current research,with the increase in the speed,the bearing current presents a trend of first increasing and then decreasing.The discharge activity of the bearing is kept at a high value when the motor is started.The variable speed operation is more harmful to the bearing life than the constant speed operation.Power excitation is an important factor affecting bearing breakdown.Both DC and AC power supplies cause breakdown and discharge of bearing.The influence of power switching frequency on bearing discharge behavior is not uniform.In the design phase of the motor,the impact of the motor impedance on bearing voltage should be considere

关 键 词：轴电压 轴电流 滚动轴承 电蚀失效 缓解措施 

分 类 号：TM302[电气工程—电机]