检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张平 张士举 闫大波 张云程 Ping Zhang;Shiju Zhang;Dabo Yan;Yuncheng Zhang(Leshan School of New Energy and Materials,Vocational and Technical College,Leshan,Sichuan 614000;Vanadium and Titanium College of Panzhihua University,Panzhihua,Sichuan 617000;Sichuan Desheng Group Vanadium and Titanium Co.,LTD.,Leshan,Sichuan 614000)
机构地区:[1]乐山职业技术学院新能源与材料学院,四川乐山614000 [2]攀枝花学院钒钛学院,四川攀枝花617000 [3]四川德胜集团钒钛有限公司,四川乐山614000
出 处:《新疆钢铁》2024年第3期12-14,共3页Xinjiang Iron and Steel
基 金:乐山市重点科技计划项目(23SZD008);乐山职业技术学院课题(KY2023009)。
摘 要:含钛高炉渣是高炉冶炼过程中的副产物,研究含钛高炉渣熔化特性对优化高炉冶炼过程和提高炉渣处理效率提供了理论依据。以四川省德胜钢铁有限公司含钛高炉渣为研究对象,采用Fact Sage^(®)热力学软件模拟研究不同含量的Al_(2)O_(3)对含钛高炉渣的熔化特性的影响。研究发现,Al_(2)O_(3)对含钛高炉渣开始熔化温度、完全熔化温度均有影响,其中对含钛高炉渣开始熔化温度影响效果不显著,开始熔化温度约为1164℃;对含钛高炉渣开始熔化温度影响效果较为显著,完全熔化温度约为1439℃,Al_(2)O_(3)含量每增加0.5%,含钛高炉渣完全熔化温度降低约3℃。研究结果为高炉冶炼过程中炉渣的管理提供了重要的理论依据。Titanium high slag is a byproduct in the blast furnace smelting process,and studying the melting characteristics of titanium high slag provides a theoretical basis for optimizing the blast furnace smelting process and improving the efficiency of blast furnace slag treatment process.Then the effect of Al_(2)O_(3) with different content was investigated.It is found that Al_(2)O_(3) has an effect on the initial melting temperature and complete melting temperature of high titanium slag,and the effect on the initial melting temperature is about 1164℃;on the initial melting temperature of high titanium slag,the complete melting temperature is about 1439℃.For each 0.5%increase of Al_(2)O_(3) content,the complete melting temperature of high titanium slag decreases by about 3℃.The results provide an important theoretical basis for the management of slag during blast furnace smelting.
关 键 词:Al_(2)O_(3) 含钛高炉渣 熔化特性 FactSage~? 热力学模拟
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222