压力容器计算软件SW6与PV Elite开孔补强计算差异比较  

Comparison of Opening Reinforcement Calculation Difference Between Pressure Vessel Calculation Software SW6 and PV Elite

作　　者：范磊 李亚坤 邢孟文 赵文军 姜琳 Fan Lei;Li Yakun;Xing Mengwen;Zhao Wenjun;Jiang Lin(TZ(TIANJIN)Binhai Heavy Machinery Co.,Ltd.,Tianjin 300452,China;Richfrom Engineering Technology(Tianjin)Co.,Ltd.,Tianjin 300452,China)

机构地区：[1]太重(天津)滨海重型机械有限公司技术中心化工所,天津300452 [2]利丰工程技术(天津)有限公司,天津300452

出　　处：《机械管理开发》2024年第10期29-32,共4页Mechanical Management and Development

摘　　要：通过运行SW6、PV Elite两软件分别计算一压力容器的接管开孔补强来比较两软件计算开孔补强的不同。在相同工况载荷下,通过实例比较,两软件在计算过程中,主要区别为SW6中开孔补强计算是依据于GB/T 150.3.6中计算公式,PV Elite的开孔补强计算则是依据于ASME Ⅷ-1中UG-37中计算公式。通过运行两软件,并结合工程实例,分析GB/T 150与ASMEⅧ-1中径向接管等面积补强计算的差异,为今后的压力容器设计提供参考。In this paper,the nozzle opening reinforcement of a pressure vessel is calculated with SW6 and PVElite respectively to compare the difference between the two calculation software.Under the same load case,by comparing living examples,it is shown that the main difference between the two calculation software lies in that SW6 opening reinforcement calculation is based on GB/T150.3.6 formula,while PV Elite opening reinforcement calculation is based on UG-37 formula in ASME VIII-1.With the support of engineering examples,this paper analyzes the difference between GB/150 and ASME VII-1 in equal area reinforcement calculation of radial nozzle by running the two software,which provides reference for future pressure vessel design.

关 键 词：压力容器 GB/T 150 ASME SW6 PV Elite 开孔补强 

分 类 号：TH49[机械工程—机械制造及自动化]