桥梁信息模型——有限元模型转换接口研发  

Development of Bridge Information Model to Finite Element Model Conversion Interface

作　　者：杨成发 刘鸣岐 赵飞 王宁[1] 张育智[1] 杨万理[1,4] Yang Chengfa;Liu Mingqi;Zhao Fei;Wang Ning;Zhang Yuzhi;Yang Wanli(School of Civil Engineering,Southwest Jiaotong University,Chengdu 610031,China;Power China Guiyang Engineering Corporation Limited,Guiyang 550081,China;Sichuan Provincial Communications Department Traffic Reconnaissance and Design Research,Chengdu 610017,China;School of Civil Engineering,Xinjiang Institute of Engineering,Urumqi 830023,China)

机构地区：[1]西南交通大学土木工程学院,成都610031 [2]中国电建集团贵阳勘测设计研究院有限公司,贵阳550081 [3]四川省交通勘察设计研究院有限公司,成都610017 [4]新疆工程学院土木工程学院,乌鲁木齐830023

出　　处：《土木建筑工程信息技术》2024年第5期91-96,共6页Journal of Information Technology in Civil Engineering and Architecture

基　　金：四川省科技计划项目(编号:23ZDYF1911)。

摘　　要：针对当前桥梁信息模型难以自动转换为有限元模型,且转换过程中存在关键几何信息丢失、荷载和边界条件难以添加等问题,本文基于Revit API二次开发技术,采用C#语言在Visual Studio2022平台开发了Revit信息模型与ANSYS有限元模型之间的转换接口。该接口实现了从信息模型获取构件几何信息、空间位置、物理信息、荷载和边界条件等功能,并将这些信息转换为ANSYS APDL命令流,通过后台启动ANSYS导入命令流生成有限元模型,完成荷载添加和边界条件设置,进行计算分析。本文详细介绍了转换接口的开发思路、工具和关键技术,并通过工程案例验证了该接口的准确性、便捷性和高效性。To address the current issues in automatically converting bridge information models to finite element models,including loss of key geometric information and difficulty in adding loads and boundary conditions,this study develops a conversion interface between Revit information models and ANSYS finite element models using C#on the Visual Studio 2022 platform,based on the Revit API secondary development technology.The interface retrieves geometric,spatial,physical,load,and boundary information from the model,converting it into ANSYS APDL command streams.ANSYS then generates finite element models,adds loads and boundary conditions,and performs finite element calculations.This paper details the development concepts,tools,and key technologies,and validates the interface through engineering case studies,demonstrating its accuracy,convenience,and efficiency.

关 键 词：桥梁信息模型 BIM Revit API 有限元模型 ANSYS 转换接口 二次开发 

分 类 号：TU17[建筑科学—建筑理论]