鼓风曝气设备去除印染废水中悬浮固体的研究  

Study on the removal rate of suspended solids in printing and dyeing wastewater by blast aeration equipment

作　　者：王文兵 易慧 WANG Wenbing;YI Hui(College of Ecological and Environmental Protection,Guangxi Ecological Engineering Vocational and Technical College,Liuzhou 545002,China;College of Food and Chemical Engineering,Liuzhou Institute of Technology,Liuzhou 545616,China)

机构地区：[1]广西生态工程职业技术学院生态环境保护学院,广西柳州545002 [2]柳州工学院食品与化学工程学院,广西柳州545616

出　　处：《印染助剂》2024年第10期76-80,共5页Textile Auxiliaries

基　　金：2024年度广西高校中青年教师科研基础能力提升项目(2024KY1270);2023年度广西生态工程职业技术学院校级课题(2023KY05)。

摘　　要：印染废水中含有大量悬浮固体,影响水质,增加水体的浊度,对水生生物造成伤害。传统的废水处理技术虽然在一定程度上有效,但常因处理效率不稳定或成本较高而受限。近年来,鼓风曝气技术因在有机污染物降解和氧气供给方面具有潜在优势,成为废水处理新方法。系统研究鼓风曝气设备在印染废水处理中对悬浮固体的去除率,深入探讨该技术的去除机制及其在实际应用中的能效表现。Printing and dyeing wastewater contains a lot of suspended solids,which affects the water quality,increases the turbidity of the water body,and causes harm to aquatic organisms.Traditional wastewa⁃ter treatment techniques,while effective to a certain extent,are often limited by inconsistent treatment effi⁃ciency or high cost.In recent years,blast aeration technology has become a new method for wastewater treat⁃ment due to its potential advantages in the degradation of organic pollutants and oxygen supply.The removal rate of suspended solids in the treatment of printing and dyeing wastewater by blast aeration equipment was systematically studied,and the removal mechanism and performance of the technology in practical application were deeply discussed.

关 键 词：鼓风曝气设备 印染废水 悬浮固体 

分 类 号：X703[环境科学与工程—环境工程]