细支中空滤棒成型机拉毛缺陷改进  

Improvement of Pulling Defects in Fine Hollow Filter Rod Forming Machine

作　　者：张芸萍 廖小波 张文文[1] 邱潇 张铮铮 李金奥 虞丽娜 ZHANG Yunping;LIAO Xiaobo;ZHANG Wenwen;QIU Xiao;ZHANG Zhengzheng;LI Jin'ao;YU Lina(Hongyun Honghe Tobacco(Group)Co.,Ltd.,Kunming,Yunnan 650000,China)

机构地区：[1]红云红河烟草(集团)有限责任公司,云南昆明650000

出　　处：《自动化应用》2024年第20期8-10,共3页Automation Application

摘　　要：针对高速生产状态下,细支中空滤棒拉毛缺陷率高,导致设备不稳定、生产效率低的问题,以KDF-M(NWT)机型为研究对象,对其生产的细支中空滤棒缺陷率高的原因进行分析。通过对芯棒重新优化设计,降低中空滤棒拉毛缺陷率,提升KDF-M(NWT)设备运行效率和质量水平。结果表明,其改进效果明显。In response to the high defect rate of fine hollow filter rods in high-speed production,which leads to equipment instability and low production efficiency,this study analyzes the reasons for the high defect rate of fine hollow filter rods produced by the KDF-M(NWT)model.By re optimizing the core rod design,the defect rate of hollow filter rod pulling is reduced,and the operating efficiency and quality level of KDF-M(NWT)equipment are improved.The results indicate that its improvement effect is significant.

关 键 词：KDF-M(NWT) 细支中空滤棒 拉毛缺陷 

分 类 号：TS43[农业科学—烟草工业]