蓄电池安装过程泄放电阻检测系统  

Discharge Resistance Detection System During Battery Installation Process

作　　者：周波[1] 李斌[1] 张春柳[1] 余越 孙义濛 ZHOU Bo;LI Bin;ZHANG Chunliu;YU Yue;SUN Yimeng

机构地区：[1]北京卫星环境工程研究所

出　　处：《计量与测试技术》2024年第10期98-100,共3页Metrology & Measurement Technique

摘　　要：在航天器安装蓄电池组的过程中,需实时监测蓄电池组与舱板接地点间泄放电阻的变化情况。本文根据该蓄电池组的安装需求,通过对该电阻的检测技术进行研究,提出了一种自动检测系统,并进行试验验证。结果表明:该系统可消除人工检测的读数误差,提高效率和准确性,具有可行性。It is necessary to monitor the change of the bleed resistance between the battery pack and the cabin board ground point in real time during the installation of the battery pack.In this paper,according to the installation requirements of the battery,through the research of the resistance detection technology,an automatic detection sys-tem is proposed,and the test is verified.The results show that the system can eliminate the reading error of manual detection,improve the efficiency and accuracy,and is feasible.

关 键 词：航天器 蓄电池组 泄放电阻 

分 类 号：TM9[电气工程—电力电子与电力传动]