检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘佳盛 罗晓强 侯翠红[1] 薛灵伟 LIU Jiasheng;LUO Xiaoqiang;HOU Cuihong;XUE Lingwei(School of Chemical Engineering,Zhengzhou University,Zhengzhou 450001,China;School of Chemical and Environmental Engineering,Pingdingshan University,Pingdingshan 467000,China)
机构地区:[1]郑州大学化工学院,河南郑州450001 [2]平顶山学院化学与环境工程学院,河南平顶山467000
出 处:《无机盐工业》2024年第11期45-50,共6页Inorganic Chemicals Industry
基 金:河南省自然科学基金项目(232300420103)。
摘 要:随着新能源汽车和锂离子电池的普及和推广,磷酸锰铁锂材料作为锂离子电池正极材料,其电化学性能亟待进一步优化。在诸多磷酸锰铁锂改性手段中,阴离子位取代的研究较少。LiF作为掺杂剂,通过F-取代PO_(4)^(3-)部分氧位的改性方法可提高磷酸锰铁锂的电化学性能。以Li_(2)CO_(3)、LiF、MnCO_(3)、FeC_(2)O_(4)·2H_(2)O、NH_(4)H_(2)PO_(4)和蔗糖为原料,通过高温固相法制备LiMn_(0.8)Fe_(0.2)PO_(4)−X_(F2)X/C(X=0.003、0.005、0.01、0.02)材料,并研究了不同氟掺杂量对LiMn_(0.8)Fe_(0.2)PO_(4)/C正极材料电化学性能的影响。结果表明,氟的掺入仅对LiMn_(0.8)Fe_(0.2)PO_(4)/C的晶格参数有轻微的改变,而对粒径影响不大;在电化学方面,氟掺杂使LiMn_(0.8)Fe_(0.2)PO_(4)/C具有良好的可逆容量和倍率性能,LiMn_(0.8)Fe_(0.2)PO_(3.99)F_(0.02)/C表现出最高的初始容量和最佳的倍率性能,0.1C和5C倍率下的放电比容量分别为155.1 mA·h/g和128.6 mA·h/g。相较于未掺杂的LiMnFePO_(4),LiMn_(0.8)Fe_(0.2)PO_(3.99)F_(0.02)/C在1C下循环500次后容量保持率从73.3%提高到96.1%。With the popularization and promotion of new energy vehicles and lithium-ion batteries,the electrochemical performance of lithium manganese iron phosphate as cathode material for lithium-ion batteries needs to be further optimized.Among the modification methods of lithium ferromanganese phosphate,there are few studies on anion substitution.By the modification method of F^(-)replacing PO_(4)^(3-)partial oxygen site,LiF was used as a dopant to improve the electrochemical performance of lithium manganese iron phosphate.LiMn_(0.8)Fe_(0.2)PO_(4)−X_(F2)X/C(X=0.003,0.005,0.01,0.02)materials were prepared by high temperature solid state method using Li_(2)CO_(3),LiF,MnCO_(3),FeC_(2)O_(4)·2H_(2)O,NH_(4)H_(2)PO_(4)and sucrose as raw materials,and the effects of different fluorine doping contents on the electrochemical properties of LiMn_(0.8)Fe_(0.2)PO_(4)/C cathode materials were studied.The analyses demonstrated that fluorine could be incorporated into LiMn_(0.8)Fe_(0.2)PO_(4)/C without altering the olivinestructure,but slightly changing the lattice parameters and having little effect on the particle sizes.The results of electrochemical measurement showed that fluorine doping in LiMn_(0.8)Fe_(0.2)PO_(4)/C resulted in good reversible capacity and rate capability.LiMn_(0.8)Fe_(0.2)PO_(3.99)F_(0.02)/C exhibited highest initial capacity and best rate performance.Its discharge capacities at 0.1C and 5C rates were 155.1 mA·h/g and 128.6 mA·h/g,respectively.After 500 cycles at 1C,the capacity retention was increased from 73.3%to 96.1%compared with the unmodified materials.
分 类 号:TM911[电气工程—电力电子与电力传动]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49