PCD刀具车削玻璃纤维增强复合材料切削温度研究  

Research on Cutting Temperature of Glass Fiber Reinforced Composites Turned by PCD Tool

作　　者：韩剑平 黄树涛[1] 葛亮[2] 施华 于晓琳[1] 许立福[1] HAN Jian-ping;HUANG Shu-tao;GE Liang;SHI Hua;YU Xiao-lin;XU Li-fu(School of Mechanical Engineering,Shenyang Ligong University,Shenyang 110159,China;School of Equipment Engineering,Shenyang Ligong University,Shenyang 110159,China;Yibin Sanjiang Machinery,Yibin 644000,China)

机构地区：[1]沈阳理工大学机械工程学院,辽宁沈阳110159 [2]沈阳理工大学装备工程学院,辽宁沈阳110159 [3]宜宾三江机械有限责任公司,四川宜宾644000

出　　处：《机械工程与自动化》2024年第6期18-19,23,共3页Mechanical Engineering & Automation

基　　金：中央引导地方科技发展资金资助(2023JH6/100100045)。

摘　　要：进行了PCD刀具车削玻璃纤维增强复合材料实验,研究了切削用量对切削温度的影响规律。研究结果表明:切削温度随着切削速度的增加而增大,随进给量的增加先增大后减小,随着背吃刀量的增加而增大。The effect of cutting parameters on cutting temperature when PCD tool is used to turn glass fiber reinforced composites is studied.The results show that the cutting temperature increases with the increase of cutting speed.The cutting temperature increases first and then decreases with the increase of feed rate.The cutting temperature increases with the increase of cutting speed.

关 键 词：玻璃纤维增强复合材料 切削用量 切削温度 PCD刀具 

分 类 号：TB332[一般工业技术—材料科学与工程]