某回转体工件托架及运输车设计  

Design of a Certain Rotating Body Workpiece Carrier and Transport Vehicle

作　　者：郝钢 任华杰 牟祖峰 鄢芳勇 王岩 HAO Gang;REN Hua-jie;MOU Zu-feng;YAN Fang-yong;WANG Yan(The Second Military Representative Office in Shenyang,Shenyang 110043,China;The Third Military Representative Office in Shenyang of PLA Naval Equipment Department,Shenyang 110045,China;Liaoshen Industries Group Co.,Ltd.,Shenyang 110045,China;Norendar International Ltd.,Shijiazhuang 050011,China;Shenyang Yiying Machinery Parts Technology Co.,Ltd.,Shenyang 110122,China)

机构地区：[1]驻沈阳地区第二军事代表室,辽宁沈阳110043 [2]海装沈阳局驻沈阳地区第三军事代表室,辽宁沈阳110045 [3]辽沈工业集团有限公司,辽宁沈阳110045 [4]北方工程设计研究院有限公司,河北石家庄050011 [5]沈阳亿赢机械零部件科技有限公司,辽宁沈阳110122

出　　处：《机械工程与自动化》2024年第6期149-150,153,共3页Mechanical Engineering & Automation

摘　　要：为了解决某回转体工件在试验前的保温以及运输问题,依据恒温保温箱和回转体工件的尺寸设计了该工件的托架结构,并采用UG建立了托架的三维模型。应用ANSYS Workbench对所设计的托架结构进行了有限元分析,托架的最大变形为0.76157 mm,最大等效应力为108.21 MPa,满足使用要求。最后根据托架结构和回转体工件的摆放要求设计了运输车,以满足回转体工件的运输要求。In order to solve the problem of heat preservation and transportation of a rotary workpiece before the test,the bracket structure of the workpiece was designed based on the dimensions of the insulation box and the rotating workpiece,and a three-dimensional model of the bracket was established using UG.Based on this,ANSYS Workbench was used to perform finite element analysis on the designed bracket structure.The maximum total deformation of the bracket was 0.76157 mm,and the maximum equivalent stress was 108.21 MPa,which meets the requirements for use,Finally,a transportation vehicle was designed based on the structure of the bracket and the placement requirements of the rotating body workpiece.The transportation vehicle can meet the transportation requirements of the rotating body workpiece.The designed bracket and transportation vehicle can perfectly solve the insulation and transportation requirements of a certain rotating body workpiece before testing,and can also provide reference for similar product testing requirements.

关 键 词：回转体 托架 运输车 

分 类 号：TH122[机械工程—机械设计及理论]