KDFM-NWT滤棒成型机负压吸附式中空滤棒稳定装置的研究  

Research on the Negative Pressure Adsorption Hollow Filter Rod Stabilization Device of KDFMNWT Filter Rod Forming Machine

作　　者：张苏璐 高河山 陈瑞军 何荣发 张芸萍 杨俊 刘华 ZHANG Sulu;GAO Heshan;CHEN Ruijun;HE Rongfa;ZHANG Yunping;YANG Jun;LIU Hua(Hongyun Honghe Tobacoo(Group)Co.,Ltd.,Kunming,Yunnan 650231,China)

机构地区：[1]红云红河烟草(集团)有限责任公司,云南昆明650231

出　　处：《自动化应用》2024年第21期184-187,共4页Automation Application

摘　　要：KDFM-NWT滤棒成型机设备启动时和生产过程中烟枪出口处滤条硬度低(滤条偏软),且烟枪和EYEPORT入口之间为悬空状态,滤棒条没有支撑,导致该位置滤嘴条抖动幅度较大,造成设备频繁跑条停机,严重影响设备效率。同时,入口处滤条抖动会导致滤条在进入切割位置时不稳定,造成滤棒切口不平和滤棒长短不均,影响产品质量。针对此问题,设计一种中空滤棒稳定装置,采用支撑+负压的方式将其限制在滤棒支撑槽内,可有效减小中空滤棒条的抖动,保证中空滤棒从烟枪进入EYEPORT时的稳定性,从而提高设备的运行效率和产品质量。When the KDFM-NWT filter rod forming machine equipment is started and during the production process,the hardness of the filter rod at the outlet of the smoke gun is low(the filter rod is relatively soft),and the gap between the smoke gun and the EYEPORT inlet is suspended.The filter rod does not have support,resulting in significant shaking of the filter rod at this position,causing the equipment to frequently run and stop,seriously affecting equipment efficiency.At the same time,due to the shaking of the filter strip at the entrance can cause instability when the filter strip enters the cutting position,resulting in uneven cutting and length of the filter rod,which affects product quality.To address this issue,a hollow filter rod stabilization device is designed,which uses a support+negative pressure method to confine it in the filter rod support groove,effectively reducing the shaking of the hollow filter rod and ensuring the stability of the hollow filter rod when it enters EYEPORT from the smoke gun,thereby improving the operating efficiency and product quality of the equipment.

关 键 词：中空滤棒稳定装置 支撑组件 负压设备 

分 类 号：TS43[农业科学—烟草工业]