检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周家智 肖慧萍[1] 谢小林[1] 周志嵩 安林 李文博 ZHOU Jiazhi;XIAO Huiping;XIE Xiaolin;ZHOU Zhisong;AN Lin;LI Wenbo(School of Materials Science and Engineering,Nanchang Hangkong University,Nanchang 330000,China;Jiangsu Xingda Steel Cord Co.,Ltd.,Taizhou 225721,China;School of Polymer Science and Engineering,Qingdao University of Science and Technology,Qingdao 266000,China)
机构地区:[1]南昌航空大学材料科学与工程学院,南昌330000 [2]江苏兴达钢帘线股份有限公司,泰州225721 [3]青岛科技大学高分子科学与工程学院,青岛266000
出 处:《复合材料学报》2024年第10期5584-5598,共15页Acta Materiae Compositae Sinica
基 金:国家自然科学基金(52063021);江西省重点研发计划项目(20224BBE51049)。
摘 要:橡胶/钢帘线复合材料的传热与温度场分析对橡胶制品的硫化成型、热氧老化、热疲劳寿命研究具有重要意义。本文基于多尺度传热模型对不同钢帘线占比、排列角度和温升工况下的橡胶/钢帘线复合材料传热和散热机制进行研究,并通过实验验证。结果表明,橡胶/钢帘线复合材料呈现明显的各向异性传热行为,传热界面的热流聚集效应会加速热量的层间扩散,使温度分布更均匀。模拟计算得到的辐射散热发射率高达0.95,且随着钢帘线占比增大和温度升高,辐射散热行为越明显。对比串并联传热模型,多尺度传热模型预测误差从10.1%减小到2.5%。Heat transfer and temperature field analysis of rubber steel/cord composites are important for the study of vulcanization molding,thermo-oxidative aging,and thermal fatigue life of rubber products.In this paper,the heat transfer and heat dissipation mechanisms of rubber/steel cord composites with different steel cord ratios,laminate angles and temperature rise operating conditions are investigated based on a multi-scale heat transfer model and experimentally verified.The results show that the rubber/steel cord composites exhibit obvious anisotropic heat transfer behavior,and the heat flow aggregation effect at the heat transfer interface accelerates the interlayer diffusion of heat for more uniform temperature distribution.The radiative heat dissipation emissivity obtained from the simulation is as high as 0.95,and the radiative heat dissipation behavior is more pronounced as the percentage of steel cord increases and the temperature rises.Compared to the series-parallel heat transfer model,the prediction error of the multiscale heat transfer model is reduced from 10.1%to 2.5%.
关 键 词:橡胶/钢帘线复合材料 辐射散热 多尺度模型 传热机制 流体动力学模型
分 类 号:TB333[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.144.251.83