带水平加劲肋PEC墙-钢梁刚接节点极限承载力  

Ultimate Bearing Capacity of Steel Beam Rigid Joint Connection for Partially Encased Composite Walls with Horizontal Stiffeners

作　　者：张咸昌 朱浩川[2,4] 叶灵鹏 肖志斌 金振奋[2,4] ZHANG Xianchang;ZHU Haochuan;YE Lingpeng;XIAO Zhibin;JIN Zhenfen(College of Civil Engineering and Architecture,Zhejiang University,Hangzhou 310058,China;Center for Balance Architecture Zhejiang University,Hangzhou 310028,China;Zhejiang Greentown-Leap Architecture Design Co.,Ltd.,Hangzhou 310011,China;The Architectural Design&Research Institute of Zhejiang University,Hangzhou 310028,China)

机构地区：[1]浙江大学建筑工程学院,杭州310058 [2]浙江大学平衡建筑研究中心,杭州310028 [3]浙江绿城利普建筑设计有限公司,杭州310011 [4]浙江大学建筑设计研究院有限公司,杭州310028

出　　处：《建筑钢结构进展》2024年第11期66-75,95,共11页Progress in Steel Building Structures

基　　金：浙江大学平衡建筑研究中心基金(KYY-669000-0011、KYY-669000-0034);浙江省工程建设标准和科研服务采购项目(CTZB-2020050375)。

摘　　要：部分包覆钢-混凝土组合(Partially encased composite,PEC)墙在装配式建筑领域具有广阔的应用前景,但其节点承载力尚待进一步深入研究。对带水平加劲肋PEC墙-钢梁刚接节点受力性能进行研究,基于既有试验验证有限元模拟的准确性,考察水平加劲肋厚度、柱间腹板厚度、暗柱截面高度和暗柱横隔板间距等参数对节点承载力的影响,根据节点受力机理和有限元分析结果,提出带水平加劲肋PEC墙-钢梁刚接节点极限承载力计算式。研究表明,计算值与有限元结果吻合良好,适用于带水平加劲肋PEC墙-钢梁刚接节点的极限承载力计算,可供相关工程设计应用参考。Partially encased composite(PEC)walls have broad application prospects in the field of prefabricated buildings,but the research on the bearing capacity of their joints remains to be improved.In this paper,the mechanical properties of PEC wall-steel beam rigid joints with horizontal stiffeners were studied.Based on the existing tests,the accuracy of finite element simulation was verified,and the influence of parameters such as the thickness of horizontal stiffeners,the thickness of web between columns,the section height of concealed columns and the spacing of diaphragm between concealed columns on the joint bearing capacity were investigated.Based on the joint mechanical behavior and finite element analysis results,a formula for calculating the ultimate bearing capacity of PEC wall-steel beam rigid joint with horizontal stiffeners was proposed.The results show that the calculated values of the formula in this paper are in good agreement with the finite element results,and can be used to determine the ultimate bearing capacity of PEC wall-steel beam rigid joint with horizontal stiffeners,providing reference for relevant engineering design applications.

关 键 词：部分包覆钢-混凝土组合墙 节点极限抗弯承载力 有限元模拟 水平加劲肋 

分 类 号：TU398.9[建筑科学—结构工程]