六面体工装结构动力学仿真分析及优化  

Structural Dynamics Simulation Analysis and Optimization of Hexaherdral Tooling

作　　者：赵超 刘雨轩 丁智力 徐惠曈 ZHAO Chao;LIU Yu-xuan;DING Zhi-li;XU Hui-tong(The Second Military Representative Office of the Air Force Equipment Department in Tianjin,Tianjin 300300;Tianjin Aerospace Rely Technology Co.,Ltd.,Tianjin 300462)

机构地区：[1]空军装备部驻天津地区第二军事代表室,天津300300 [2]天津航天瑞莱科技有限公司,天津300462

出　　处：《环境技术》2024年第10期108-117,共10页Environmental Technology

摘　　要：为满足某产品振动试验,合理的设计工装可以体现出产品遭遇真实的振动环境。本文利用ANSYS软件对六面体工装进行了模态分析、正弦振动和随机振动分析,得到了六面体工装和工装加模拟件的振型、应力及加速度响应。最后根据仿真计算结果对六面体工装薄弱环节及缺陷进行优化,保证试验产品能经受振动试验考核。To meet the vibration test of a product,a reasonable design of tooling can reflect the real vibration environment encountered by the product.In this paper,ANSYS software is used to analyze the modal analysis,sinusoidal vibration and random vibration analysis of the hexahedral tooling,and the mode shape,stress and acceleration response of the hexahedral tooling and the tooling and simulation parts are obtained.Finally,according to the simulation results,the weak links and defects of the hexahedral tooling are optimized to ensure that the test products can withstand the vibration test assessment.

关 键 词：仿真分析 模态分析 结构优化 

分 类 号：V216.5[航空宇航科学与技术—航空宇航推进理论与工程]