Ti含量对分别采用废料和全新料熔铸的Al-6.2Zn-2.1Mg-2.1Cu合金铸锭晶粒细化效果的影响  

The effect of Ti addition on grain refinement of Al-6.2Zn-2.1Mg-2.1Cu alloy ingot

作　　者：吕丹[1] 王金花[1] 张祥斌 于芯悦 LV Dan;WANG Jinhua;ZHANG Xiangbin;YU Xinyue(Northeast Light Alloy Co.,Ltd.,Harbin 150060,China)

机构地区：[1]东北轻合金有限责任公司,黑龙江哈尔滨150060

出　　处：《轻合金加工技术》2024年第10期51-55,共5页Light Alloy Fabrication Technology

摘　　要：在用废料重熔和全新料熔炼的Al-6.2Zn-2.1Mg-2.1Cu合金中以AlTi5B1丝状中间合金的方式分别加入质量分数为0.005%、0.01%、0.02%、0.04%和0.06%的Ti,将铝液浇入铁模,获得小铸锭,研究Ti含量对铸锭晶粒细化效果的影响。结果表明,晶粒细化效果来源于新添加Ti,当添加w(Ti)=0.02%~0.04%时,Al-6.2Zn-2.1Mg-2.1Cu合金铸锭晶粒细化效果最佳。Ti elements of 0.005%,0.01%,0.02%,0.04%,and 0.06%were added to the Al-6.2Zn-2.1Mg-2.1Cu alloy remelted with waste material and that melted with fresh material,respectively,by adding AlTi5B1 filamentous master alloy.Pour aluminum liquid into the iron mold to obtain small ingots.Through comparative analysis of metallographic structures,it is clear that the grain refinement effect comes from the newly added Ti.The appropriate amount of Ti added to Al-6.2Zn-2.1Mg-2.1Cu alloy is 0.02%-0.04%,at which point the grain refinement effect of the ingot is optimal.

关 键 词：Al-6.2Zn-2.1Mg-2.1Cu合金 TI含量 晶粒细化 废料 

分 类 号：TG292[金属学及工艺—铸造]