检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:洪艳[1] 卢旦[2] 李昆松 崔暘 杨博[1] HONG Yan;LU Dan;LI Kunsong;CUI Yang;YANG Bo(School of Civil Engineering and Architecture,Zhejiang Sci-Tech University,Hangzhou 310018,China;Shanghai Architecture Technology Innovation Center of East China Architectural Design and Research Institute Co.,Ltd.,Shanghai 200002,China;School of Intelligent Engineering,Guangzhou Huashang Vocational College,Guangzhou 511300,China;Zhejiang Hualin Construction Group Co.,Ltd.,Hangzhou 311100,China)
机构地区:[1]浙江理工大学建筑工程学院,杭州310018 [2]华东建筑设计研究院有限公司上海建筑科创中心,上海200002 [3]广州华商职业学院智能工程学院,广州511300 [4]浙江华临建设集团有限公司,杭州311100
出 处:《浙江理工大学学报(自然科学版)》2024年第6期820-831,共12页Journal of Zhejiang Sci-Tech University(Natural Sciences)
基 金:国家自然科学基金项目(51808499);广西科学技术计划项目(桂建科〔2020〕5号)。
摘 要:针对波纹管通孔柱的抗震性能及承载力是否能够达到“等同现浇”的问题,通过拟静力试验分析波纹管通孔柱试件(包含1个无缺陷柱和1个含有30%灌浆缺陷的预制柱)的滞回性能、骨架曲线、位移延性、刚度退化、耗能能力等各项抗震性能指标,给出波纹管通孔柱的承载力计算公式。拟静力试验表明:波纹管可以产生有效的环向约束作用,波纹管通孔柱可达到“等同现浇”的要求;波纹管内含30%及以下的灌浆缺陷会削弱预制柱的抗震性能,但影响较小;波纹管通孔柱承载力公式计算结果与试验结果较吻合。该研究可为波纹管通孔柱在装配式结构领域中的应用及相应规范的编制提供一定的理论依据。In response to the question of whether the seismic performance and bearing capacity of corrugated pipe through-hole columns can achieve"equivalent cast-in-place",this paper analyzed the hysteresis performance,skeleton curve,displacement ductility,stiffness degradation,energy dissipation capacity and other seismic performance indexes of corrugated pipe through-hole column specimens(including one column without defects and one prefabricated column with 30%grouting defects)by means of quasi-static test,and given the formula for calculating the bearing capacity of the corrugated pipe through-hole columns.The quasi-static tests show that the pipe can produce effective circumferential restraint,and the corrugated pipe through-hole column can meet the requirements of"equivalent cast-inplace";the grouting defects of 30%or less in the pipe will weaken the seismic performance of the prefabricated columns,but the effect is relatively small;the results of the calculation of the bearing capacity formula for corrugated pipe through-hole columns coincide well with the test results.This study can provide some theoretical basis for the application of corrugated pipe through-hole columns in the field of assembled structures and the preparation of corresponding specifications.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.135.184.134