检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王海军 朱方艳[2] 郭英健 庞立 WANG Haijun;ZHU Fangyan;GUO Yingjian;PANG Li(Occupational Diseases Department,Huai'an City Second People's Hospital,Huai'an,Jiangsu 220300,China;Institute of Emergency Technology,Jiangsu Academy of Safety Science and Technology,Nanjing,Jiangsu 210042,China;Quality Department,Sinopharm Jiangsu Medical Device Co.,Ltd,Nanjing,Jiangsu 210019,China;Zhangjiagang Free Trade Zone Safety&Environment Protection Management Bureau,Suzhou,Jiangsu 215600,China)
机构地区:[1]淮安市第二人民医院职业病科,江苏淮安220300 [2]江苏省安全生产科学研究院应急技术研究所,江苏南京210042 [3]国药集团江苏医疗器械有限公司质量部,江苏南京210019 [4]张家港保税区安全环保局,江苏苏州215600
出 处:《职业与健康》2024年第17期2310-2313,共4页Occupation and Health
摘 要:目的调查淮安市工业园区某废旧汽车和家用电器拆解企业职业病危害现状,找出该类企业职业病危害因素共性和存在问题,以期为企业后期整改和其他企业提供借鉴。方法2020—2022年,连续3年对淮安市某废旧机械拆解企业现场职业卫生调查、职业病危害因素检测以及职业健康监护的基础上,综合分析评估其职业病危害现状和存在问题。结果该废旧机械拆解企业主要的职业病危害因素为拆解和破碎岗位的粉尘和噪声。该企业经3年职业病危害治理后,2020年噪声作业岗位7个,2021年6个,2022年5个。近3年职业健康检查结果显示,2020年发现噪声职业禁忌证2人、2021年1人、2022年4人。该企业噪声危害控制和治理无效,职业病危害程度有逐年增加的趋势。结论废旧机械拆解企业职业病危害的关键控制点为粉尘防护和噪声作业岗位的隔离和控制,噪声作业岗位识别精准和检测全面是噪声控制的基础。因此全面实施职业病危害岗位连续监测,隔离治理噪声,督促劳动者正确佩戴个体防护用品等可以改善噪声作业环境,促进劳动者职业健康。Objective To investigate the status quo of occupational hazards in a waste machinery dismantling enterprise in Huai'an Industrial Park,identify the commonalities and problems of occupational hazards in these enterprises,in order to assist rectification and provide reference for other enterprises.Methods Based on three years of field occupational health investigation,occupational hazard factor detection and occupational health surveillance in a waste machinery dismantling enterprise in Huai'an City from 2020 to 2022,comprehensive analysis and evaluation of the current status and existing problems of occupational hazards was conducted.Results The main occupational hazards of the waste machinery dismantling enterprise were dust and noise from dismantling and crushing positions.After three years of occupational hazard control,there were seven noise work positions in 2020,six in 2021,and five in 2022.According to the results of occupational health medical examinations in the past three years,two people were found to have occupational contraindication to noise in 2020,one people in 2021,and four people in 2022.The noise hazard control of the enterprise was ineffective,and there was a trend of increasing year by year in the degree of occupational hazards.Conclusions The key control points for occupational hazards of waste machinery dismantling enterprises are dust protection,and isolation and control of noisy work positions.The accurate identification and comprehensive detection of noise work positions are the foundation of noise control.Therefore,these could improve the noise working environment and promote occupational health of workers,such as continuous monitoring of occupational hazards,isolation of noise,and urging workers to wear personal protective equipment.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.220.1.197