1000MW汽轮机润滑油系统油涡轮漏油原因及处理  

Reason and Solutions for Oil Turbine Leakage in the Lubricating Oil System of 1000MW Steam Turbine

作　　者：柯永省 KE Yong-sheng(Zhejiang Zheneng Yueqing Power Generation Co.,Ltd.,Wenzhou 325609,China)

机构地区：[1]浙江浙能乐清发电有限责任公司,温州325609

出　　处：《汽轮机技术》2024年第6期464-466,共3页Turbine Technology

摘　　要：某电厂1000MW超超临界机组在基建调试过程中,因汽轮机润滑油母管压力下降引起交流润滑油泵自启,导致调试试验中断。对汽轮机润滑油母管压力下降原因进行了分析,原因为油箱内部油涡轮进口法兰聚四氟乙烯垫片泄漏所致。经过试验,在保证汽轮机轴承安全可控的前提下,汽轮机缸温低于280℃时停运主机电动盘车,通过降低主机润滑油油箱油位并维持顶轴油系统运行、进行连续手动盘车,完成油涡轮垫片的快速更换工作,有效地缩短了检修工期。During the construction and commissioning process of a 1000MW ultra supercritical unit in a power plant,the AC lubricating oil pump started automatically due to the pressure drop of the turbine lubricating oil main pipe,resulting in the interruption of the commissioning test.The article provides a detailed introduction to the reason for the pressure drop in the lubricating oil main pipe of the steam turbine,which is caused by the leakage of the PTFE gasket at the inlet flange of the oil turbine turbine in the oil tank.After testing to ensure the safety and controllability of the steam turbine bearings,the main engine electric disc drive was stopped when the cylinder temperature of the steam turbine was below 280℃.By reducing the oil level in the main engine lubricating oil tank,maintaining the operation of the jacking oil system,and performing continuous manual disc drive,rapid replacement of the oil turbine gasket was achieved,effectively shortening the maintenance period.

关 键 词：油涡轮 润滑油 轴承 汽轮机 

分 类 号：TK263.86[动力工程及工程热物理—动力机械及工程]