硅烷偶联剂IMLV/N330对飞机轮胎胎面胶性能的影响  

Effect of Silane Coupling Agent IMLV/N330 on Properties of Tread Compound of Aircraft Tire

作　　者：朱飞雷 刘征宇 黄志义 王瑞童 俞华英 刘蓉 ZHU Feilei;LIU Zhengyu;HUANG Zhiyi;WANG Ruitong;YU Huaying;LIU Rong(ChemChina Shuguang Rubber Industry Research and Design Institute Co.,Ltd,Guilin 541004,China;Naval Equipment Department Military Representative Bureau in Guangzhou,Guangzhou 510715,China)

机构地区：[1]中国化工集团曙光橡胶工业研究设计院有限公司广西航空轮胎结构与材料重点实验室,广西桂林541004 [2]海军装备部驻广州地区军事代表局,广东广州510715

出　　处：《橡胶工业》2024年第12期925-929,共5页China Rubber Industry

基　　金：广西科技重大专项(桂科AA22068106);广西重点研发计划项目(桂科AB21220060)。

摘　　要：对飞机轮胎胎面胶进行新型硅烷偶联剂IMLV/N330替代传统硅烷偶联剂Si69的研究试验。结果表明,采用硅烷偶联剂IMLV/N330替代硅烷偶联剂Si69和部分炭黑,胶料的硫化速率加快,撕裂强度和拉断伸长率增大,耐热空气老化性能、抗切割性能和耐屈挠龟裂性能提高,耐磨性能无明显变化,生热稍有上升。The new silane coupling agent IMLV/N330 was used to replace the traditional silane coupling agent Si69 in aircraft tire tread compounds.The test results showed that using silane coupling agent IMLV/N330 to replace silane coupling agent Si69 and partial carbon black,the vulcanization rate of the compound was accelerated,the tear strength and elongation at break increased,the hot air aging resistance,cutting resistance and flexural cracking resistance were improved,the wear resistance changed little,and the heat generation slightly increased.

关 键 词：硅烷偶联剂 飞机轮胎 胎面胶 撕裂强度 抗切割性能 

分 类 号：TQ330.387[化学工程—橡胶工业] TQ336.1