铣刀多重刀齿分布及其动态切削行为特性  

Multiple teeth distributions of a milling cutter and dynamic cutting behaviour characteristics

作　　者：王斌 姜彬[1] 范丽丽 赵培轶 成远清 毕刚 WANG Bin;JIANG Bin;FAN Lili;ZHAO Peiyi;CHENG Yuanqing;BI Gang(School of Mechanical and Power Engineering,Harbin University of Sciences and Technology,Harbin 150080,China;AECC Harbin Dongan Engine Co.,Ltd.,Harbin 150066,China)

机构地区：[1]哈尔滨理工大学机械动力工程学院,哈尔滨150080 [2]中国航发哈尔滨东安发动机有限公司,哈尔滨150066

出　　处：《振动与冲击》2024年第22期181-190,共10页Journal of Vibration and Shock

基　　金：国家自然科学基金(52375421);黑龙江省自然科学基金重点项目(ZD2020E008)。

摘　　要：受刀齿误差影响,铣刀沿轴向存在多种刀齿分布,振动作用下具有多重刀齿分布的铣刀,其切削行为呈现多时变特性,导致切削过程中切削层厚度变化和铣削表面形貌分布具有复杂性和不确定性。依据铣刀结构和刀齿误差,获取沿铣刀轴向的多重刀齿分布序列,构建振动作用下多重刀齿分布的瞬时切削层厚度和铣削表面形貌分布解算模型,揭示沿铣刀轴向的单齿、多齿不等齿距和多齿等齿距分布的动态切削行为特征,阐明刀齿误差和铣削振动对铣刀瞬时切削层厚度及铣削表面形貌分布多样性的影响机制,并进行试验验证。结果表明,采用上述模型与方法,可揭示出振动作用下多重刀齿分布铣刀的动态切削行为及铣削表面的形成过程。Due to the influence of tooth errors,multiple teeth distributions exist along the axial direction of a milling cutter.The milling cutter with multiple teeth distributions under vibration exhibit multi temporal characteristics in cutting behaviors,resulting in complex and uncertain variation in cutting layer thickness and morphology distribution during cutting.Based on the cutter structure and tooth error,a sequence of multiple teeth distributions along the axial direction of the cutter was obtained,and a calculation model for cutting layer thickness and morphology distribution of multiple teeth distributions under vibration was constructed.Cutting behaviors in the cases of single tooth,multiple teeth unequal pitch,and multi teeth equal pitch distributions along cutter axis were revealed.The influence mechanism of error and vibration on instantaneous cutting layer thickness and morphology distribution diversity was elucidated and experimentally verified.The results indicate that the above method can reveal the dynamic cutting behaviors of multiple teeth distributions cutters under vibration and the formation processes of milling surfaces.

关 键 词：铣刀 刀齿误差 铣削振动 多重刀齿分布 动态切削行为 

分 类 号：TH212[机械工程—机械制造及自动化] TH213.3