检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴铮 凌浩川 王记俊 赵卓 李珊 WU Zheng;LING Haochuan;WANG Jijun;ZHAO Zhuo;LI Shan(Bohai Oilfield Research Institute,Tianjin Branch of CNOOC Ltd.,Tianjin 300459,China)
机构地区:[1]中海石油(中国)有限公司天津分公司渤海石油研究院,天津300459
出 处:《新疆石油天然气》2024年第4期70-76,共7页Xinjiang Oil & Gas
基 金:中国海洋石油有限公司综合科研项目“海上典型油气藏天然气/CO_(2)协同驱替提高油气采收率研究”(KJZH-2024-2205)。
摘 要:渤海海域BZ低渗油藏注CO_(2)驱油技术首次尝试应用,为取得目标油藏注CO_(2)混相驱规律认识,利用细管实验与长岩心驱替实验两种方法确定目标区块最小混相压力与驱油效率。结果表明:细管实验测得的最小混相压力32.65 MPa,能够满足矿场实现混相驱;长岩心驱替实验考虑了储层实际特征,驱油效率结果更符合实际矿场开发。应用数模方法建立概念模型,分析了注采井距、注入强度对注气波及系数的影响。结果表明:在开发初期,地层压力较高,注入气主要沿着高渗储层运移,而地层压力下降后,受油气密度差异影响导致的超覆作用加剧,注气能够波及中渗储层。对于物性较差储层,产出端应采用压裂等方式提高注采压差,保障产能贡献。结合开发指标,注采井距控制在350~400 m,注气强度控制在1×10^(4)~2×10^(4) m^(3)/d较为合理,优化后方案预测高峰采油速度2.7%,预测采收率22.2%,累计埋存107×10^(4) t CO_(2)。研究成果为BZ低渗油藏的注气开发方案优化以及井位井距选取提供技术支持,对海上注气开发具有重要实际意义。For the first time,CO_(2) flooding is attemptively applied to the BZ low permeability reservoir of Bohai Sea area.To capture the rule of CO_(2) miscible flooding in the target reservoir,the minimum miscibility pressure(MMP)and displacement efficiency of the target block were determined using two methods,namely the slim tube and long core flooding tests.The results show that the MMP measured via the slim tube test is 32.65 MPa,and miscibility can be realized in the field.The long core flooding incorporates the actual character-istics of the reservoir,and the measured displacement efficiency is more consistent with the field development reality.The conceptual model was built by numerical simulation to analyze the effects of the injector-producer spacing and injection intensity on the sweep ef-ficiency of gas injection.It is shown that during the early development with the high reservoir pressure,injected gas mainly migrates along the high permeability reservoir;it sweeps the medium-low permeability reservoir,as the reservoir pressure declines and the grav-ity segregation of CO_(2),induced by the oil-gas density difference,intensifies.For reservoirs with relatively inferior porosity and permea-bility,production wells shall be stimulated(e.g.fracturing)to improve the injector-producer pressure difference and ensure sufficient production.In accordance with the development indexes,an injector-producer spacing within 350-400 m and injection intensity of 1×10^(4)-2×10^(4) m^(3)/d are preferred.For the optimized scheme,the recovery rate is predicted to be 2.7%/a,associated with an estimated recovery factor of 22.2%and cumulative CO_(2) storage of 107×10^(4) t.The findings of this research provide technical support for the gas flooding scheme and well location/spacing determination and are of great practical significance for offshore gas flooding.
关 键 词:CO_(2)驱油 最小混相压力 油藏数值模拟 注气波及系数 CCUS 提高采收率
分 类 号:TE135[石油与天然气工程—油气勘探]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.117.174.43