压裂返排液及采出水处理示范工程实例  

Demonstration Project Example of Fracturing Backflow Fluid and Produced Water Treatment

作　　者：许跃 许洪祝 周启立 陆彩霞 史金卓 孙金龙 XU Yue;XU Hongzhu;ZHOU Qili;LU Caixia;SHI Jinzhuo;SUN Jinlong(CNOOC Tianjin Chemical Industry Research and Design Institute Co.,Ltd.,Tianjin 300131,China)

机构地区：[1]中海油天津化工研究设计院有限公司,天津300131

出　　处：《水处理技术》2024年第11期148-152,共5页Technology of Water Treatment

摘　　要：陕西省神府某区块致密气压裂返排液及采出水组分复杂,难于处理。采用“隔油/高密斜管沉降/一体化破胶/涡凹气浮/无机过滤/保安过滤/精细过滤”处理工艺,处理规模为采出水130 m^(3)/d,压裂返排液为150 m^(3)/d,共计280 m^(3)/d。工艺运行结果表明,该工艺处理效果稳定,出水含油量≤5 mg/L、悬浮固体含量≤1 mg/L、悬浮物颗粒直径中值≤1μm,满足SY/T 5329-2012中注入层平均空气渗透率<0.01μm^(2)级水质标准并进行顺利回注。神府1#水处理站实现了紧凑一体化、高度自动化的橇装集成,布局紧凑合理,占地面积仅为1 943 m^(2)。The components of tight pressure fracturing backflow fluid and produced water in a certain block of Shenfu,Shaanxi Province are complex and difficult to handle.The treatment process of"oil separation/high-density inclined tube sedimentation/integrated gel breaking/concave air flotation/inorganic filtration/security filtration/fine filtration"is adopted,with a treatment capacity of 130 m^(3)/d of produced water and 150 m^(3)/d of fracturing flowback fluid,totaling 280 m^(3)/d.The process operation results show that the treatment effect of this process is relatively high,with the effluent oil content≤5 mg/L,suspended solid content≤1 mg/L,and the median diameter of suspended particles≤1μm.Meet the requirement of SY/T 5329-2012 that the average air permeability of the injection layer is less than 0.01μm^(2) level water quality standard and successful reinjection.The Shenfu 1#water treatment station has achieved compact integration and highly automated sled mounted integration,with a compact and reasonable layout,covering an area of only 1943 square meters.

关 键 词：采出水 压裂返排液 工程实例 一体化破胶 撬装设备 

分 类 号：X703[环境科学与工程—环境工程]