钢丝绳芯输送带硫化生产线-新型成型车的研制  

Development of a new type of molding vehicle for vulcanization production line of steel wire rope core conveyor belt

作　　者：孙友萍 石永芝 薛福光 周士峰 刘培华 Sun Youping;Shi Yongzhi;Xue Fuguang;Zhou Shifeng;Liu Peihua(Qingdao Hailang Intelligent Equipment Co.LTD.,Qingdao 266400,Shandong,China)

机构地区：[1]青岛海琅智能装备有限公司,山东青岛266400

出　　处：《橡塑技术与装备》2024年第12期59-63,共5页China Rubber/Plastics Technology and Equipment

摘　　要：通过对钢丝绳芯输送带硫化生产线成型车行走系统、冷压平板、切边胶、上下胶片导开小车、精分梳、液压系统的研发,解决冷压压力不均匀、成型质量差、生带粘锅、胶片敷贴偏差大、分梳辊更换不方便、裁边分离不彻底等问题,提高输送带成型机硫化质量,提高效率,减轻劳动强度。Through the research and development of the walking system,cold pressing plate,edge cutting rubber,upper and lower film guide trolley,precision combing,and hydraulic system of the vulcanization production line of steel wire rope core conveyor belt,problems such as uneven cold pressing pressure,poor forming quality,tape sticking to the pot,large deviation in film application,inconvenient replacement of combing rollers,and incomplete separation of cutting edges have been solved.The new improvements have improved the vulcanization quality of the conveyor belt forming machine,increased efficiency,and reduced labor intensity.

关 键 词：成型车 冷压平板 双工位 槽辊式分梳 压力分组 

分 类 号：TQ330.47[化学工程—橡胶工业]