检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:季群标 JI Qunbiao(Fuzhou Jiangyin Industrial Zone Development and Construction Co.,Ltd.,Fuzhou,Fujian 350000,China)
机构地区:[1]福州市江阴工业区开发建设有限公司,福建福州350000
出 处:《黑龙江交通科技》2024年第11期171-174,181,共5页Communications Science and Technology Heilongjiang
摘 要:由于港前大道(新江公路—三峡路)改造工程施工现场环境复杂多变,实际施工中难以保障现场作业安全。为解决这一问题,研究物联网技术在港前大道(新江公路—三峡路)改造工程施工安全管理中的应用。先构建一个本案例项目施工的工程安全物联网,然后基于该物联网,实时监测无线区域、保障材料质量安全、预警环境危险状态、实时监测设备参数、实现现场合理调度几方面进行施工安全的全面管理。最后开展实证分析,验证所提方法的先进性。实证结果表明,应用物联网技术,实例改造工程中施工现场的安全事故发生率仅为0.78%,安全隐患排查率高达98.67%,安全管理效果良好。Due to the complex and ever-changing construction environment of the Gangqian Avenue(Xinjiang Highway to Sanxia Road)renovation project,it is difficult to ensure the safety of on-site operations during actual construction.To address this issue,this article studies the application of IoT technology in the construction safety management of the Gangqian Avenue(Xinjiang Highway to Sanxia Road)renovation project.First,build an engineering safety IoT for the construction of this case project.Then,based on this IoT,real-time monitoring of wireless areas,ensuring material quality and safety,warning of environmental hazards,real-time monitoring of equipment parameters,and achieving reasonable on-site scheduling will be carried out for comprehensive management of construction safety.Finally,empirical analysis is carried out to verify the progressiveness of the proposed method.The empirical results show that the application of IoT technology has resulted in a safety accident rate of only 0.78%at the construction site of the example project,with a safety hazard investigation rate of up to 98.67%,and a good safety management effect.
分 类 号:U415.1[交通运输工程—道路与铁道工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.7