检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王贤彪 周怡劼 陈梁 顾东明 Wang Xianbiao;Zhou Yijie;Chen Liang;Gu Dongming(East China Survey and Design Institute(Fujian)Co.,Ltd.,Fuzhou 350003,China;Faculty of Engineering,China University of Geosciences,Wuhan 430074,China;Badong National Observation and Research Station for Geohazards,Badong 444300,China)
机构地区:[1]华东勘测设计院(福建)有限公司,福建福州350003 [2]中国地质大学工程学院,湖北武汉430074 [3]湖北巴东地质灾害国家野外科学观测研究站,湖北巴东444300
出 处:《地球科学》2024年第10期3799-3814,共16页Earth Science
基 金:青海贵南哇让抽水蓄能电站可行性研究工程地质勘测-下水库进/出水口边坡稳定性分析及不良地质体治理研究(No.20233060244)。
摘 要:高山峡谷地区水电工程中的边坡失稳问题十分常见,对工程的建设与水库运行安全有着重要影响.以黄河上游哇让抽水蓄能电站下库进/出水口边坡为研究对象,基于平硐编录、钻孔电视等方法对岩体结构面进行统计;通过钻孔波速测试,开展边坡岩体卸荷分带;据此,对边坡潜在破坏模式进行定性分析.通过UDEC软件,建立基于DFN离散裂隙网络的边坡离散元模型,考虑天然、暴雨和地震3种工况,分别对自然边坡、无支护开挖过程以及支护开挖过程进行数值模拟,揭示边坡潜在变形主控因素.结果显示,边坡的变形破坏主要受卸荷裂隙和顺坡向缓倾裂隙两组结构面控制,潜在变形模式为台阶状滑移-拉裂破坏;稳定性研究表明,自然边坡在3种工况下,抗滑稳定性均不满足规范要求.为保证进出水口安全,结合边坡变形模式和工程经验,提出了相应的开挖支护方案.研究表明,该支护方案有效可行,可有效提高边坡稳定性且使稳定系数满足规范要求.Slope instability is very common in the process of building hydropower projects in alpine canyon areas,which has an important impact on engineering construction.In this paper,the slope of the inlet/outlet of the lower reservoir of the Warang pumped storage power station in the upper reach of the Yellow River is taken as the research object.Based on the methods of adit logging and borehole TV,the rock mass structural plane is counted:Through borehole wave velocity test,unloading zoning of slope rock mass is carried out.Accordingly,the potential failure mode of the slope is qualitatively analyzed.Through UDEC software,a discrete element model of slope based on DFN discrete fracture network is established.Considering three working conditions of natural,rainstorm and earthquake,the numerical simulation of natural slope,unsupported excavation process and supported excavation process are carried out respectively to reveal the main controlling factors of potential deformation of slope.The results show that the deformation and failure of the slope are mainly controlled by two groups of structural planes:unloading fissures and gently inclined fissures along the slope.The potential deformation mode is step-like slip-crack failure.The stability study shows that the anti-sliding stability of the natural slope does not meet the specification requirements under three working conditions.In order to ensure the safety of inlet and outlet,combined with slope deformation mode and engineering experience,the corresponding excavation support scheme is proposed.The research shows that the supporting scheme is effective and feasible,which can effectively improve the slope stability and make the stability coefficient meet the specification requirements under different working conditions.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.33