检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:韩少卫 洪卫华 李传江 HAN Shaowei;HONG Weihua;LI Chuanjiang(State Grid Anhui Provincial Power Supply Company,Tongling Power Supply Company,Tongling 244000,China)
机构地区:[1]国网安徽省供电公司铜陵供电公司,安徽铜陵244000
出 处:《电工技术》2024年第20期110-112,共3页Electric Engineering
摘 要:当前分布式直流电源远程监控系统预设的功能模块多为目标式,监控效率低,导致远程监控频率大幅度下降,为此提出基于嵌入式单片机的分布式直流电源远程监控系统。根据当前的监控需求,先进行分布式直流电源嵌入式单片机远程监控系统硬件的设计,然后采用多阶的方式提升监控效率,设计多阶嵌入式单片机直流电源远程监控功能模块,并接入直流电源远程监控数据库,完成对系统软件的设计。测试结果表明,针对选定的6个测试区段,经过3个周期的测试,最终得出的远程监控频率均可以达到150 Hz以上,这说明该分布式直流电源远程监控系统更为高效,具有实际的应用价值。The preset functional modules of the current distributed DC source remote monitoring system are mostly set as target type,resulting in low monitoring efficiency and a significant decrease in remote monitoring frequency.Therefore this work designed an embedded microcontroller-based remote monitoring system for distributed DC sources.First,according to the current monitoring requirements,the hardware demand of the system was determined,and a multi-stage approach was adopted to improve the efficiency of monitoring.Then a multi-stage embedded microcontroller DC source remote monitoring function module was designed and connected to the remote monitoring database to complete the design of the system software.The proposed system was indicated,by a three-cycle test,to achieve remote monitoring frequencies above 150 Hz in all the 6 selected sections,and thereby to have potential efficiency and practicability.
关 键 词:嵌入式 单片机 分布式直流 直流电源 监控系统 远程控制
分 类 号:TM764[电气工程—电力系统及自动化]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.15