检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:吴伟[1] 陈李莹 WU Wei;CHEN Li-ying(The First Affiliated Hospital of Fujian Medical University,Fuzhou Fujian 350001,China)
机构地区:[1]福建医科大学附属第一医院,福建福州350001
出 处:《计算机仿真》2024年第11期427-431,共5页Computer Simulation
基 金:福建省科技计划项目(2022CX002303)。
摘 要:在密集部署的医疗物联网环境中,设备间的相互干扰可能导致通信质量下降,导致通信资源分配功耗较高,难度较大。为此,提出医疗物联网终端设备通信资源低功耗分配方法。建立物联网终端设备通信资源最优分配目标函数。基于设置终端设备公平性度量因子,完成终端设备子载波分配,解决通信冲突问题。通过为每个终端设备分配特定的子载波,可以减少设备间的干扰,提高频谱利用效率。基于此,基于DNN网络,建立压缩网络和功率分配网络,将压缩后的信息作为功率分配网络的输入,最小化终端设备在医疗物联网中的总发射功率,以此实现医疗物联网终端设备通信资源的低功耗分配。实验结果表明,研究方法应用下,资源利用率升高速度较快,最终可达60%以上。利用所提方法分配通信资源后,医疗物联网的吞吐量保持在60Mbps左右。以上结果说明所提方法具有较高的资源利用率和网络吞吐量,可有效降低资源分配功耗。In densely deployed medical Internet of Things environments,mutual interference between devices may lead to the decline of communication quality,resulting in high power consumption and difficulty in communication re-source allocation.Therefore,a low power allocation method for communication resources of medical IoT terminal e-quipment is proposed.Establish the objective function for the optimal allocation of communication resources of Internet of Things terminal equipment.Based on setting the fairness measurement factor of the terminal equipment,the subcarrier allocation of the terminal equipment is completed to solve the communication conflict problem,By assigning specific subcarriers to each terminal device,interference between devices can be reduced and spectrum utilization effi-ciency can be improved.Based on this,a compression network and a power distribution network were established based on the DNN network.The compressed information was used as the input of the power distribution network to minimize the total transmission power of the terminal equipment in the medical Internet of Things,so as to realize the low power allocation of the communication resources of the medical Internet of Things terminal equipment.The experi-mental results show that under the application of the research method,the resource utilization rate increases rapidly,and eventually reaches more than 60%.After the proposed method is used to allocate communication resources,the throughput of the medical Internet of Things is maintained at about 6OMbps.The above results show that the proposed method has high resource utilization and network throughput,and can effectively reduce resource allocation power con-sumption.
关 键 词:医疗物联网 终端设备 子载波分配 功率分配 通信资源
分 类 号:TP393[自动化与计算机技术—计算机应用技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.145.179.147