基于三段四次载荷控制的离心泵叶轮设计方法及试验研究  

Design method based on load control of a three-segment quartic function and experiments for centrifugal pumps

作　　者：鲁阳平 谭磊[1] LU Yangping;TAN Lei(State Key Laboratory of Hydroscience and Engineering,Department of Energy and Power Engineering,Tsinghua University,Beijing 100084,China)

机构地区：[1]清华大学能源与动力工程系水圈科学与水利工程全国重点实验室,北京100084

出　　处：《清华大学学报（自然科学版）》2024年第12期2115-2121,共7页Journal of Tsinghua University(Science and Technology)

基　　金：中国船舶集团热能动力技术重点实验室开放基金资助项目(TPL2021A02)。

摘　　要：针对离心泵叶片载荷控制精度低、高效运行区间窄的难题,该文基于三段四次函数控制叶片载荷分布,提出了一种离心泵叶轮设计方法。该方法将叶片载荷沿叶轮进口到出口分为进口段、中间段和出口段,每段给定四次函数型载荷分布规律,构建基于三段四次载荷控制的叶轮设计方法。基于本文提出的设计方法,设计了一台比转速为102的离心泵,并对其能量特性和流场特性开展了数值模拟。结果表明,相比基准叶轮,优化叶轮在多工况点下的平均效率提高了5.35%,且具有宽广的高效运行区间。优化叶轮内部压力分布更加均匀,流线分布更加合理。最后,本研究加工了离心泵叶轮和泵体,搭建了流体机械综合性能试验台,试验测量结果表明离心泵最高效率为78.20%,满足设计要求。[Objective] Centrifugal pumps are a common type of hydraulic machinery widely used in water transfer,energy storage,agricultural irrigation,oil production,and more.Owing to system regulation demands,these pumps often need to switch operating conditions and,therefore,operate for long periods in off-design states.This requires a wide efficient operating range and the development of advanced design methods.To address the issues of low precision in load control design methods and narrow efficient operating ranges,this paper proposes a centrifugal pump impeller design method based on the three-segment quadratic function controlling blade load distribution.[Methods] The proposed method divides the blade load from the impeller inlet to the outlet into three segments:the inlet segment,the intermediate segment,and the outlet segment.Each segment is given a quadratic function-type load distribution to construct the impeller design method based on three-segment quadratic function load control.By assigning values to 13 independent control parameters,the specific form of load distribution is determined,resulting in the final structure of the impeller.Using this design method,a centrifugal pump with a specific speed of 102 is designed and numerically simulated to analyze its energy and flow-field characteristics.This study also establishes a comprehensive test bench for closed centrifugal pump hydraulic model testing,which consists of the test pump,pipeline system,and sensors that measure inlet pressure,outlet pressure,flow rate,rotational speed,and torque.The designed pump is manufactured and tested on this bench.[Results] The simulation results demonstrate that the optimized impeller achieves a 4.11% increase in efficiency at the designed point Q_(d) and a 5.35% increase in the average efficiency under multiple operating conditions ranging from 0.7 Q_(d) to 1.3 Q_d,with an almost unchanged flow-head curve.The energy characteristics indicate that the optimized impeller has a wide efficient operating range.Internal flow-field

关 键 词：离心泵 三段四次 载荷控制 叶轮设计 数值模拟 试验研究 

分 类 号：TK72[动力工程及工程热物理—流体机械及工程]